Technical article 127595

OSR507v2 reports "CPUn boot failure"

OpenServer 5.0.7

Written · Last revised

Problem

When OSR507V version 2 appliance is imported onto an ESX 4.1 or ESXi 4.1 host and the SMP feature is selected during configuration, the additional processors cannot be enabled.

Each additional processor is reported:
WARNING:  CPUn boot failure

All the virtual processors are seen by the kernel, but only CPU 1 (boot processor) is enabled.

"cpuonoff -a 2" does not report an error, but CPU2 is not enabled.

Solution

This has been reported to VMware and VMware confirmed that the problem is due to a bug in vSphere 4.1.

May 2011:
--------
VMware has released ESX and ESXi 4.1 patches that resolves the
start-up problems with CPUs 2-n on an SMP system.

1035097 VMware ESX 4.1 Patch ESX410-201104401-SG: Updates VMkernel, VMX, CIM

http://kb.vmware.com/kb/1035097
1035108 VMware ESXi 4.1 Patch ESXi410-201104401-SG: Updates Firmware
http://kb.vmware.com/kb/1035108

Use the URLs to get access to and download the patch bundle

These patches are in ZIP file format and are provided and supported by VMware.

From the Xinuos technical article database, record 127595. Reproduced with permission. The original is at www.sco.com/ta/127595, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.