Technical article 125502

Printer problems when using an Intel Netport Express print server from Openserver 5.0.7.

OpenServer 5.0.7

Written · Last revised

Problem

I'm trying to configure remote lpd style printing to a printer off of an Intel Netport Express print server and am getting one or both of the following symptoms:

1. print jobs are not completing from my user application.

2. lpstat commands (e.g., -t) are hanging when checking the remote printer queue. At the same time this occurs, the Intel Netport drops off the network and is not pingable until the Netport is powered off and back on again.

Solution

This problem can be due to setting the "extended remote printing protocol" when configuring the remote printer through scoadmin.

If the printer is already configured, you can remedy this situation by removing the "ex" flag from the printer definition in /etc/printcap. Consider the following printcap entry:

printer1:\
:lp=:rm=printer1.foo.com:ex:rp=printer1:sd=/usr/spool/lpd/printer1:mx#0:

Edit the above line so that it now looks like

printer1:\
:lp=:rm=printer1.foo.com:rp=printer1:sd=/usr/spool/lpd/printer1:mx#0:

The "lpstat -t" command and printing to this printer from your application should now function properly. Note: you may need to power cycle your Netport Print Server to reinstate it's network connectivity as mentioned above.

For any new printers that you create, make sure that you de-select the extended remote printing protocol field when adding the printer through scoadmin.

Note: The character based version of scoadmin printer manager does not allow you to de-select this field. You will need to either use the graphical scoadmin printer manager from your X desktop or use the above procedure to remove the "ex" flag from the printcap file after creating your printer.

NOTES:    The Intel Netport Express also comes with a utility called
          "proinstall" that will allow you to configure the printer
          in a different manner. See the documentation that comes
          with your Netport for more details concerning this
          utility. This method of configuring your remote printer
          won't have the same problem noted above as it doesn't use
          the "ex" flag, but may or may not be appropriate for your
          printing needs.

From the Xinuos technical article database, record 125502. Reproduced with permission. The original is at www.sco.com/ta/125502, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.