Problem
Some systems have shown problems with the alad driver in SCO
OpenServer Release 5.0.4 products. The system will freeze or
hang about 75% of the way through the installation. Solution
These problems should be resolved by the Support Level Supplement (SLS) OSS463B, available on the SCO World Wide Web download site. This SLS consists of a new N0 boot disk and BTLD disk, containing a new alad driver.
In the rare event that this new driver does not resolve the
problem, or if downloading the SLS is not currently possible
or convenient, an older version of the alad driver which
has been shown to not exhibit the above problems in a vast majority
of cases is available on the OpenServer 5.0.4 CD-ROM. Follow
these steps to make use of this driver during installation:1. On a running SCO UNIX system, mount the OpenServer 5.0.4 CD-ROM:
mount /dev/cd0 /mnt2. Change to the images directory with this command:
cd /mnt/images/alad3. Place a UNIX formatted floppy into the system's floppy disk drive.
4. Create a new N0 diskette with this command:
dd if=N00 of=/dev/fd0Notice that the above command uses 0s (zero) and not capital Os
(oh).5. After the copy has finished, remove the floppy from the disk drive and label the floppy as:
5.0.4 N0 Install diskette6. To remove the CD-ROM from the drive type:
cd to root directoryumount /dev/cd0 to unmount the drive7. Restart the installation using the new N0 diskette as a replacement for the original N0 diskette that came with the installation kit.
See also
TA100081, "Panic when going multiuser on systems with alad driver."
TA105925, "What is SLS OSS463B, the Multiple SCSI Install N0 and BTLD Supplement?"