Technical article 127588

SCO OpenServer 5.0.7V: WARNING: uapm: can't enable APM v1.2 (error 0x00000E0A)

OpenServer 5.0.7

Written · Last revised

Problem

I see the warning:
WARNING: uapm: can't enable APM v1.2 (error 0x00000E0A)

when booting my SCO OpenServer 5.0.7V Virtual Machine on a Microsoft Hyper-V Server.

Solution

This warning is coming from the Advanced Power Management subsystem of SCO OpenServer 5.0.7V.

The Microsoft Hyper-V BIOS does not support APM v1.2 and OpenServer 5.0.7V is issuing the warning for this reason.

You can safely ignore this warning or you can do the following, as root, to remove Advanced Power Management features from the boot kernel:

1) Run the command
# mkdev pm 2

When prompted to, enter "y" to create a new kernel now.

When promoted to, enter "y" to make this kernel boot by default.

When prompted to, enter "y" to rebuild the kernel environment.

2) Reboot your server

Please note that Advanced Power Management is disabled by default in the SCO OpenServer 5.0.7V for Hyper-V Machine Image.

A customer would only see this error therefore if they explicitly ran

# mkdev pm
to configure power management.

From the Xinuos technical article database, record 127588. Reproduced with permission. The original is at www.sco.com/ta/127588, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.