Technical article 125308

SCO OpenServer Release 5.0.7 Licensing and Upgrade Frequently Asked Questions

OpenServer 5.0.7

Written · Last revised

Problem

I am looking for answers to frequently asked Openserver 5.0.7 Licensing and Upgrade questions.

Solution

What follows is a list of commonly asked licensing and upgrade questions and the answers to those questions.

Q1: Can I use an OpenServer 5.0.0/2/4/5/6 Host/Desktop/Enterprise License to install OpenServer 5.0.7?

A1: No, you cannot. You must either:

- Use an OpenServer 5.0.7 Host/Desktop/Enterprise license to install 5.0.7

or

- Use an OpenServer 5.0.6 to 5.0.7 Upgrade License plus your existing OpenServer 5.0.6 license to upgrade/install your 5.0.7 system

For upgrade model numbers see:
http://www.sco.com/products/openserver507/model_numbers.html#osr507upgd

Q2: Can I use an Openserver 5.0.6 User, CPU(SMP), VDM or OpenServer Development system license on an OpenServer 5.0.7 system?

A2: Yes, but you must ensure that you have either OSS656b or MP1 installed before attempting to apply these licenses to your system.

Q3: Can I use an OpenServer 5.0.0/2/4/5 User or CPU(SMP) license on an OpenServer 5.0.7 system?

A3: No. You must purchase a User or CPU trade-in license if you want to have the same number of users/cpus supported on your 507 system.

Q4: If I purchase a 506 to 507 upgrade, can I perform a fresh install or must I perform an in-place upgrade?

A4: You can do either. Remember however that if you perform a fresh install, you have the re-apply your 506 license to your system once the installation has been completed.

Q5: If I purchase a trade-in to 507, must I perform an in-place upgrade or can I perform a fresh installation?

A5: Trade-In licenses are for moving from any SCO Xenix, SCO Unix, OpenDesktop, OpenServer Release 5.0.5 or prior, to SCO OpenServer 5.0.7. If your current release is prior to OpenServer 5.0.5 you must perform a fresh install. If your current release is OpenServer 5.0.5 you can do either a fresh install or in-place upgrade. Unlike an Upgrade License, you will not need to enter your original OpenServer license when applying a 'Trade-In' license.

Q6: Can I perform an in-place upgrade of my 5.0.0/2/4/5/6 system to OpenServer 5.0.7?

A6: SCO support in-place upgrades of OpenServer 5.0.5 and 5.0.6 systems to 5.0.7. In-place upgrades of OpenServer 5.0.4 may work but has not been tested. In-place upgrades of OpenServer 5.0.0/2 are not supported. SCO recommend that customers have a working backup of their system before attempting any upgrade.

Q7: Can I upgrade from OpenServer 5.0.6 Host/Desktop to OpenServer 5.0.7 Enterprise system?

A7: To upgrade you must purchase:

- An upgrade from 506 Host/Desktop to 507 Host/Desktop - A 507 Host/Desktop to Enterprise Inter-Edition upgrade

Q8: How can I upgrade from OpenServer 5.0.0/2/4/5 Host/Desktop to OpenServer 5.0.7 Enterprise?

A8: To upgrade you must purchase:

- A trade-in from 50x Host/Desktop to 507 Host/Desktop - A 507 Host/Desktop to Enterprise Inter-Edition upgrade

Q9: I have installed my OpenServer 507 system using an evaluation license. Can I re-license my system now using a license I have purchased?

A9: You can only relicense your system if you have purchased an Enterprise Edition. To relicense:

- Boot your system into single user mode - Use the License Manager to remove the evaluation license - Use the License Manager to apply the new Enterprise license - Reboot your system

Q10: How can I perform an in-place upgrade of my existing pre 507 system?

A10: To perform an in-place upgrade simply boot your system using the 507
     Installation CD and follow the installation instructions. For more detail
     see the Getting Started Guide at:
http://osr507doc.xinuos.com/en/GetStart/islN.install.html

Q11: How can I perform an Inter-Edition upgrade of my 507 Host/Desktop system?

A11: To perform an inter-edition upgrade, run the Software Manager
     and install the SCO OpenServer Enterprise system from CD. For more details
     see:
http://osr507doc.xinuos.com/en/GetStart/islC.upgr_50.html

Q12: Where can I find a list of the model numbers of the licenses and upgrades for OpenServer 5.0.7?

A12: These are published at:
http://www.sco.com/products/openserver507/model_numbers.html

Q13: Can I use my Merge 4 or Merge 5.1 license to install Merge 5.3?

A13: No. You will need to purchase an upgrade if you have Merge 4.x/5.1 and wish to install Merge 5.3 on OpenServer 5.0.7.

Q14: I am using a machine that has a Hyperthreading, Dual Core, MultCore or
     Quad Core processor. This processor can be run as seperate logical
     processors.

Do I need an SMP license for each additional logical processor or each additional physical processor?

A14: You need an SMP license only for each additional physical processor (CPU) on your system.

Hyperthreading and MultiCore is only supported on OpenServer 5.0.7 systems with the latest Maintenance Pack applied.

Q15: Can I install a pre OpenServer 5.0.7 product using an SCO OpenServer 5.0.7 license?

A15: No, you cannot. For example an OpenServer 5.0.7 license cannot be used to install an OpenServer 5.0.6 media kit.

Q16: What licenses are provided as part of the SCO OpenServer 5.0.7 NFR products?

A16: The following licenses are provided with the 3 NFR products:

DA221-UX50-5.0.7 SCO OpenServer 5.0.7 Desktop System Demonstration Pack Not For Resale

51660 UPC:  DA221-UX50-5.0.7 OS5 DT NOT FOR RESALE
AV03742P000 KEY: SCO MERGE 5.3 DESKTOP VERSION
AV08106P000 KEY: VIRTUAL DISK MANAGER 1.1
AV10506P000 KEY: OPENSERVER 5.0.7 DEVELOPMENT SYSTEM
AV22100P000 KEY: OPENSERVER 5.0.7 DESKTOP SYSTEM
AV22102P000 KEY: SCO UPDATE FOR DT SYSTEM OS5.0.7
AV40299P000 KEY: UNIXWARE DEV KIT VERSION 7.1.3 LICENSE
BLB-SNAKGEN BLURB: SNAKGEN GENERIC

DA241-UX50-5.0.7 SCO OpenServer 5.0.7 Host System Demonstration Pack Not For Resale

51658 UPC: DA241-UX50-5.0.7 OS5 HOST NOT FOR RESALE AV03742P000 KEY: SCO MERGE 5.3 DESKTOP VERSION AV08106P000 KEY: VIRTUAL DISK MANAGER 1.1 AV08306P000 KEY: SMP LICENSE FOR OPENSERVER 5.0.7 AV10506P000 KEY: OPENSERVER 5.0.7 DEVELOPMENT SYSTEM AV24100P000 KEY: OPENSERVER 5.0.7 HOST SYSTEM AV24102P000 KEY: SCO UPDATE FOR HOST SYSTEM OS5.0.7 AV40299P000 KEY: UNIXWARE DEV KIT VERSION 7.1.3 LICENSE AV47700P000 KEY: AFPS 4.0 BASE FOR LICENSE FOR UW 7/OSR5 BLB-SNAKGEN BLURB: SNAKGEN GENERIC

DA261-UX50-5.0.7 SCO OpenServer 5.0.7 Enterprise System Demonstration Pack Not For Resale

51656 UPC: DA261-UX50-5.0.7 OS5 ENT NOT FOR RESALE AV03740P000 KEY: SCO MERGE 5.3 SERVER LICENSE AV04908P000 KEY: MORNING STAR PPP 2.1.5A FOR SCO OPNSRVR AV08106P000 KEY: VIRTUAL DISK MANAGER 1.1 AV08306P000 KEY: SMP LICENSE FOR OPENSERVER 5.0.7 AV10506P000 KEY: OPENSERVER 5.0.7 DEVELOPMENT SYSTEM AV26100P000 KEY: OPENSERVER 5.0.7 ENTERPRISE SYSTEM AV26102P000 KEY: SCO UPDATE FOR ENT SYSTEM OS5.0.7 AV40299P000 KEY: UNIXWARE DEV KIT VERSION 7.1.3 LICENSE AV47700P000 KEY: AFPS 4.0 BASE FOR LICENSE FOR UW 7/OSR5 BLB-SNAKGEN BLURB: SNAKGEN GENERIC 0

Q17: I had SCO OpenServer 5.0.6 Host system license. Later I upgraded
     it to OpenServer 5.0.6 Enterprise system using a upgrade license from
     5.0.6 host system. Now I have purchased a SCO OpenServer 5.0.7
     Enterprise upgrade license from 5.0.6 Enterprise.

Can I do a fresh install of SCO OpenServer 5.0.7 using the above three licenses?

A17: To upgrade and install a fresh 5.0.7 Enterprise system, you must Trade-in your 5.0.6 Host license and 5.0.6 Enterprise upgrade license to a full 5.0.6 Enterprise license. Then use the full 5.0.6 Enterprise license and the 5.0.7 Enterprise upgrade license during the fresh install of 5.0.7 Enterprise system.

Q18: When can I install the SMP Component?
A18: The SMP component is available from the OpenServer5 CD#1 and must be
     installed, post installation of the operating system and before any
     Maintenance is applied.
If you try to add SMP after Maintnenace has been applied, the "custom"
installation will fail.  Ideally, you must backup up your server first,
then remove all Maintenance, apply the SMP component from CD1, and then
re-apply Maintenance without rebooting.

Once done you can then relink the kernel and reboot the server.

However, if you have just MP5 on, for example, then you can apply SMP then immediately (before reboot) reapply the rs507d patches from MP5 by drilling to it within 'custom' and accept the defaults when installing and then relink/reboot after.

It is recommended to do this in Single User Mode.

Q19: I've entered my SMP License but when I reboot I see the following error:

sco_pmd[57]: bad/missing c flag in SMP license <License>

A19: Check the license is entered correctly, in "scoadmin license".

For example, the License Data may be entered as:  c1;k0;mudlnuts

When the actual entry on the License sheet reads: c1;k0;mud1nuts

ie. a Letter Lower Case l has been entered rather than a numeric one 1.

Q20: I've got the error message "Unable to run brand command" when I try to enter my license.

A20: The reasons for this could be:

1) You don't have a valid license combination 2) Your Nodelock file is corrupt 3) You are trying to perform an operation on a license that is not valid 4) You are trying to add or register an "invalid" license

See also

The SCO OpenServer Release 5.0.7 Model Number list at:

http://www.sco.com/products/openserver507/model_numbers.html

From the Xinuos technical article database, record 125308. Reproduced with permission. The original is at www.sco.com/ta/125308, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.