Technical article 125840

slha version 4.11.03 driver for Symbios Logic/LSI Logic Host Adapters

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

What drivers are available for Symbios Logic/LSI Logic Host Adapters?

NOTE:     This driver package is to be installed on:
SCO OpenServer 5.0.6a, 5.0.7b

Solution

This driver package is available at the following URL:

https://ftp.scoexpert.com/openserver5/507/drivers/slha_4.11.03/
	  Modification History
	  --------------------
	  1996-Dec-13 - version 3.06.09
	  1997-Sep-17 - version 4.00.02
	  1998-Jun-11 - version 4.04.02
          1999-Aug-04 - version 4.06.02
	  2003-Nov-10 - version 4.11.03

To install the driver, follow these instructions:

1. Acquire the driver from the ftp address given above.

- Download the btld image to a directory/file on your machine, for example, /tmp/slha_btld.img.

- Verify the downloaded image using sum:

sum -r /tmp/slha_btld.img
This should return:
57026  2880 /tmp/slha_btld.img

- Format a floppy disk using the format command.

- Copy the downloaded image to the floppy:

dd if=/tmp/slha_btld.img of=/dev/fd0 bs=18k

- Verify the copied floppy image using sum:

sum -r /dev/fd0
This should return:
57026  2880 /dev/fd0
2a. Fresh Installation on Primary Drive

- Insert a boot disk or Installation CD and boot the system.

- At the boot prompt, type:
defbootstr link=slha

- Press <Return> and continue with normal installation.

2b. Installation on a Secondary Drive
- Boot and Login normally.
- Mount the floppy image:
mount -r /dev/fd0 /mnt

- Use the BTLD Install script to install the driver:

/etc/btldinstall /mnt

Once the kernel has been relinked, reboot the host and verify that the driver is initializing the card. The boot time banner should look similar to:

%adapter   0xec00-0xecff  11  -  type=slha ha=0 slot=0 bus=0 id=7 fts=sto

When the adapter is installed and the boot-time banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the Ultra SCSI Bus.

NOTE:     Installation of Release Supplement 5.0.6a (RS506a) onto a system
          with this new SLHA driver installed will result in kernel relink
          errors similar to:

i386ld: Symbol numHBAs in /var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/slha/space.o is multiply defined. First defined in /var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/slha/Driver.o ERROR: Can not link-edit unix system build failed Error: kernel link failed Error Stack: Kernel link failed

If you have installed RS506a and are getting the above errors, you will need to reapply the the SHLA BTLD as described in step 2b above before rebooting your system to correct the problem.

From the Xinuos technical article database, record 125840. Reproduced with permission. The original is at www.sco.com/ta/125840, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.