Technical article 127047

The shutdown(ADM) command does not shutdown or reboot my HP Proliant System

OpenServer 5.0.7

Written · Last revised

Problem

If I run the command:
# shutdown -y -g0 -i6

my HP Proliant Server hangs before the system can reboot.

If I run the command:
# shutdown -y -g0
I never get to the
**   Safe to Power Off   **
         - or -
** Press Any Key to Reboot **
screen.

Cause

SCO have reports that the HP ProLiant ASM XL Driver (hpasm),
a driver that is part of the HP EFS, can cause the server to hang at
shutdown.

This problem has been reported to HP who are the OEM of the HP EFS by customers.

Solution

You can workaround this problem by removing the "hpasm" driver from the Unix kernel.

To do this, log into the affected server as root and run the following commands:

1) Using your favourite editor, edit the file
/etc/conf/sdevice.d/hpasm

and change the Y to an N in the second field of the driver entry.

2) Relink the kernel using:
# cd /etc/conf/cf.d
# ./link_unix
3) Reboot the system

If you need a solution to this problem then please contact your HP Support provider and request a fix for the "hpasm" driver.

From the Xinuos technical article database, record 127047. Reproduced with permission. The original is at www.sco.com/ta/127047, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.