Technical article 125792

The usbprobe command does not list all the USB devices on my SCO OpenServer 5.0.7 machine.

OpenServer 5.0.7

Written · Last revised

Problem

The usbprobe command does not list all the USB devices on my SCO OpenServer 5.0.7 machine.

Cause

There are two reasons why usbprobe might fail to list a USB device connected to your SCO OpenServer 5.0.7 system:

1) The USB device is not plugged into the first USB interface on your system.

2) The version of the USB device is not compatible with the Interface that you have plugged the USB device into. e.g. Some USB 2.0 devices do not support USB 1.1

Solution

The usbprobe command currently only reports on the first USB interface it finds on your system. If your system has more than one USB interface then run the usbprobe command from a shell as follows to list the devices on all USB interfaces:

for i in 0 1 2 3 4 5 6 7; do usbprobe -I $i done

For example, where is my printer?
bash-3.1# usbprobe -I 0
Path - Address - Description
----------------------------
0 - 1 - Hub "EHCI Root Hub"
bash-3.1# usbprobe -I 1
Path - Address - Description
----------------------------
0 - 1 - Hub "UHCI Root Hub"
bash-3.1# usbprobe -I 2
Path - Address - Description
----------------------------
0 - 1 - Hub "UHCI Root Hub"
1 - 2 - Printer "HP Deskjet 3840"
bash-3.1# usbprobe -I 3
Path - Address - Description
----------------------------
0 - 1 - Hub "UHCI Root Hub"

If your device is still not listed then maybe the device is a USB 2.0 device that is plugged into an older UHCI or OHCI interface.

To solve your problem, try plugging the device into the EHCI interface on your machine.

From the Xinuos technical article database, record 125792. Reproduced with permission. The original is at www.sco.com/ta/125792, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.