Problem
What Adaptec Host Adapters are supported by the aacraid Host Bus Adapter driver?
HARDWARE: Adaptec ASR-2120S, SCSI RAID, Single channel, Ultra320, 66Mhz
Adaptec ASR-2200S, SCSI RAID, Two channel, Ultra320, 66 Mhz
Adaptec ASR-2020ZCR, SCSI RAID, PCI Zero channel, Ultra320, PCIx
Adaptec ASR-2025ZCR, SCSI RAID, SO-DIMM Zero channel, Ultra320, PCIx
Adaptec ASR-2130S, SCSI RAID, Single channel, Ultra320, PCIx
Adaptec ASR-2230S, SCSI RAID, Two channel, Ultra320, PCIx
-
Adaptec, AAR-2020SA, SATA RAID, PCI Zero port
Adaptec, AAR-2025SA, SATA RAID, SO-DIMM Zero port
Adaptec, AAR-2410SA, SATA RAID, Four port
Adaptec, AAR-2810SA, SATA RAID, Eight port (*)
Adaptec, AAR-21610SA, SATA RAID, Sixteen port (*)
-
Dell PE1650, SCSI RAID ROMB, U160
Dell PE2650, SCSI RAID ROMB, U160
Dell PE2400, SCSI RAID ROMB, U160
Dell PE2450, SCSI RAID ROMB, U160
Dell PE2550, SCSI RAID ROMB, U160
Dell PE2500, SCSI RAID ROMB, U160
Dell PE4400, SCSI RAID ROMB, U160
Dell PE4500, SCSI RAID ROMB, U160
Dell PERC 2/QC, SCSI RAID Four channel, U160
DELL PERC 320DC, SCSI RAID, Single channel, Ultra320, 66Mhz
Adaptec, CERC SR2, SATA RAID, Six port(*) - Both the AAR-2810SA & AAR-21610SA are only supported as secondary controllers under OpenServer.
NOTE: This driver package is to be installed on:SCO OpenServer 5.0.6a, 5.0.7 Solution
This driver package is available at the following URL:
https://ftp.scoexpert.com/openserver5/507/drivers/aacraid7317Modification History
********************
09/27/04 New driver.
********************To install these drivers, follow these instructions:
1. Aquire the driver from the ftp address listed above.
- Download the btld image to a directory/file on your machine. For example, /tmp/aacraid_7.3.17.btld.img
- Verify the downloaded image using sum.
sum -r /tmp/aacraid_7.3.17.btld.imgThis should return:50168 2880 /tmp/aacraid_7.3.17.btld.img- Format a floppy disk using the format command.
- Copy the downloaded image to the floppy:
dd if=/tmp/aacraid_7.3.17.btld.img of=/dev/fd0 bs=18k- Verify the copied floppy image using sum:
sum -r /dev/fd0This should return:50168 2880 /dev/fd02a. Fresh Installation on Primary Drive- Insert a boot disk or Installation CD and boot the system.
- At the boot prompt, type:defbootstr link=aacraid btld=fd(64)- Press <Return> and continue with normal installation.
2b. Installation on a Secondary Drive- Boot and Login normally.- Mount the floppy image:mount -r /dev/fd0 /mnt- Use the BTLD Install script to install the driver:
/etc/btldinstall /mntOnce the kernel has been relinked, reboot the host and verify that it is initializing the card. The boot time banner should look something like:
%adapter 0xec00-0xecff 11 - type=aacraid ha=0 slot=0 bus=0 id=7 fts=stoWhen the adapter is installed and the boot-time banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the SCSI and/or Fibre Channel Bus.