Problem
What are the limitations on size of filesystem and disk on SCO OpenServer 5?
Solution
On all versions of OpenServer 5, the HTFS filesystem has a filesystem size limit of 1TB.
The following outlines any limits in the OpenServer IDE and SCSI Host Bus Adapter (HBA) drivers:
SCO OpenServer 5.0.0/5.0.2
--------------------------
If you install OpenServer 5.0.0 or 5.0.2 using oss451B, you can
install a disk up to 8GB in size. Without oss451B the maximum IDE
disk size supported is 2GB.SCO OpenServer 5.0.4
--------------------
OpenServer 5.0.4 has an IDE disk size limit of 8GB with no extra
drivers needed.SCO OpenServer 5.0.5
--------------------
OpenServer 5.0.5 has an IDE disk size limit of 128GB.SCO OpenServer 5.0.6
---------------------------------
OpenServer 5.0.6 has an IDE disk size limit of 128GB and added
support for ATA100 and lower.Using the wd BTLD at:http://www.sco.com/support/update/download/wddrvr.htmltheoretically supports IDE drives up to 2TB in size. Please read the notes at the URL above for further requirements and installation instructions.
SCO OpenServer 5.0.7
--------------------
OpenServer 5.0.7 has an IDE disk size limit of 128GB and added
support for ATA100 and lower.Using the wd BTLD at:http://www.sco.com/support/update/download/wddrvr.htmlhas been tested with IDE drivers up to 1TB in size.
OpenServer 5 support SCSI disks up to 1TB in size but many SCSI Host Bus Adapter (HBA)drivers limit disk size to 539Gb. For more information see TA 126819.
NOTE: Some motherboard BIOS's do not support large IDE disks. This is a
hardware limitation. Consult with your motherboard vendor for a BIOS
update or instructions on how to reconfigure the disk to support
larger disk sizes.If you encounter any disk size problems please contact your software supplier or SCO's Technical Support at:
http://www.sco.com/support/ See also
TA#126819 "The OpenServer 5.0.7 Installation Query Manager (IQM) detects my disk but does not display its capacity correctly."