Technical article 127040

What commands are available at the boot prompt?

OpenServer 6.0.0OpenServer 5.0.7UnixWare 7.1.4

Written · Last revised

Problem

I am at the SCO Unix boot prompt, what commands can I enter?

Solution

- For OpenServer5 see:
http://osr507doc.xinuos.com/en/man/html.HW/bootstring.HW.html

and for a list of additional entries, see:

TA105937 "SCO OpenServer installation bootstring options."

For information on use of the "wd.atapishift" boot string please see:

TA127094 "How can I install OpenServer 5.0.7 on the ASUS F8Vr Laptop?"

For information on use of the "disable=usb_[ehci,ohci,uhci] boot string please see:

TA125947, "My HP ProLiant G4 panics when a USB 2.0 device is on the system."

and:

TA125546, "How do I disable USB at the boot: prompt upon bootup of OpenServer 5?"

- For OpenServer6 see:
http://osr600doc.xinuos.com/man/html.HW/boot.HW.html
- For UnixWare7 see:
http://uw714doc.xinuos.com/en/man/html.4/boot.4.html

- Additional parameters provided by later Maintenance Packs can be checked at:

http://www.sco.com/support/download.html
and are detailed in:

How do I Install and Getting Started with UnixWare7/OpenServer6 on an HP/Compaq server?

TA 116163
Specifically:

The ACPI and USE_XAPIC boot parameters enforces the OS to assume the presence of Advanced Configuration and Power Interface (ACPI) and xAPIC (Extended Advanced Programmable Interrupt Controller) instead of using the auto-detection mechanism.

The USE_XAPIC boot parameter increases the addressability of interrupt distribution beyond the default limitation of 8 cpus. The limitation was set due to number of bits used to name the APIC's local and I/O units.

USE_XAPIC=Y
USE_XAPIC=N

The ACPI boot parameter forces the OS to assume that the system configuration tables are set in the format compliant with the ACPI specification instead of MPS specification.

ACPI=X
ACPI=Y
ACPI=N
and:

How do I Install and Getting Started with OpenServer5 on an HP/Compaq server?

TA 119088

and with regard to essential USB devices not being detected, in general, check that:

a) You should use the latest OpenServer6 recut CD from 2006 at:

http://www.sco.com/support/update/download/release.php?rid=161

or the latest Boot CD when no essential USB devices are detected at boot time from:

ftp://ftpput.sco.com/tmp/support/ISO/OpenServer-6.0.0Ni-boot-2008-06-23.iso

This is a 14 MB iso image and should ONLY be used for booting some modern servers that that lack a legacy PS/2 keyboard and have USB peripherals ONLY (USB Keyboard / Mouse), where the full March 2006 OpenServer 6.0.0 install CD might have issues booting from such servers.

or the UnixWare7 June 2008 recut CD from:

http://www.sco.com/support/update/download/release.php?rid=346

and then install the latest MP4 Maintenance and supplemental maintenance.

ie. for OpenServer6:
OSS711a and OSS714a from:
http://www.sco.com/support/update/download/product.php?pfid=12&prid=20
and for UnixWare7:
ptf9055, udienv_802e and usb_802e from:
http://www.sco.com/support/update/download/product.php?pfid=1&prid=6

b) Alternatively, the customer should try the following parameters in /etc/default/boot or at boot time:

GEN_MEM_MAX=2048
GEN_MEM_MAX=4096
Set this parameter to specify a maximum value, in megabytes, for general purpose memory. The default is ``8192'' (8GB). Any memory above this value can be used as dedicated memory by setting the DEDICATED_MEMORY parameter.
or:
ENABLE_4GB_MEM=NO
or:
PSM=atup

Whilst this doesn't guarantee the issue will be fixed it will ensure all is done to help resolve the problem on any equipment, whether it is certified/supported or not.

In the boot manager you can use the command "show -a" to show what parameters have been set and what their current value is.

See also

For OpenServer5:
bootstring(HW)
For OpenServer6:
boot(4)
For UnixWare7:
boot(HW)

From the Xinuos technical article database, record 127040. Reproduced with permission. The original is at www.sco.com/ta/127040, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.