Problem
What DELL Host Adapters are supported by the percraid Host Bus Adapter driver?
NOTE: This driver package is to be installed on:SCO OpenServer 5.0.6a, 5.0.7 Solution
This driver package is available at the following URL:
https://ftp.scoexpert.com/openserver5/507/drivers/percraid7317Modification History
********************
09/27/04 New driver.
********************To install these drivers, follow these instructions:
1. Aquire the driver from the ftp address listed above.
- Download the btld image to a directory/file on your machine. For example, /tmp/percraid_7.13.17.btld.
- Verify the downloaded image using sum.
sum -r /tmp/percraid_7.13.17.btld.imgThis should return:20895 2880 /tmp/percraid_7.13.17.btld.img- Format a floppy disk using the format command.
- Copy the downloaded image to the floppy:
dd if=/tmp/percraid_7.13.17.btld.img of=/dev/fd0 bs=18k- Verify the copied floppy image using sum:
sum -r /dev/fd0This should return:20895 2880 /dev/fd02a. Fresh Installation on Primary Drive- Insert a boot disk or Installation CD and boot the system.
- At the boot prompt, type:defbootstr link=percraid- Press <Return> and continue with normal installation.
2b. Installation on a Secondary Drive- Boot and Login normally.- Mount the floppy image:mount -r /dev/fd0 /mnt- Use the BTLD Install script to install the driver:
/etc/btldinstall /mntOnce the kernel has been relinked, reboot the host and verify that it is initializing the card. The boot time banner should look something like:
%adapter 0xec00-0xecff 11 - type=percraid ha=0 slot=0 bus=0 id=7 fts=stoWhen the adapter is installed and the boot-time banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the SCSI and/or Fibre Channel Bus.