Problem
The boot floppy included in the SCO OpenServer Release
5.0.7 media kit does not boot on some servers and
desktops. Characteristic of this problem is that the boot
floppy from the SCO OpenServer Release 5.0.7 media kit is
inserted in the target system floppy drive at boot time.
When the system is booted, the floppy drive access light goes
on for a short period of time, yet the system acts as though
there is no boot floppy available. The error message
"Boot Error" may also be displayed. Cause
The BIOS in the servers and desktop systems on which the
boot floppy fails are checking for "signature bytes" at the
end of the boot sector. The boot floppy image from the SCO
OpenServer Release 5.0.7 media kit does not have these
signature bytes. Solution
The boot floppy image provided by SLS OSS670A includes the "signature bytes" missing from the boot floppy in the SCO OpenServer Release 5.0.7 media kit that some BIOS require.
Please see the following cover letter for more information on this SLS:
---------------------------------Dear SCO Customer,Support Level Supplement (SLS) OSS670A, the SCO OpenServer Release 5.0.7 Boot Floppy Image Supplement, addresses the following problem:
The boot floppy included in the OpenServer Release 5.0.7 media kit does not boot on some servers and desktops. Typically, the boot floppy from the OpenServer Release 5.0.7 media kit is inserted in the target system floppy drive and the floppy drive access light goes on for a short period of time at boot, yet the system acts as though there is no boot floppy available. The error message "Boot Error" may also be displayed.
SLS OSS670A provides a boot floppy image which contains the correct "signature bytes" so that it will be recognized by the BIOS on server and desktop systems that do not recognize the boot floppy image from the OpenServer Release 5.0.7 media kit.
Software Notes and Recommendations
----------------------------------
SLS OSS670A can be used with:SCO OpenServer Release 5.0.7Installation Instructions
-------------------------1. Download the OSS670A boot floppy image file from:
https://ftp.scoexpert.com/openserver5/507/patches/oss670a/oss670a.ddPlace the file in the /tmp directory, and extract it to a formatted floppy with this command:
dd if=/tmp/oss670a.dd of=/dev/rfd0 bs=36b2. The floppy generated above should now be labeled as a SCO OpenServer Release 5.0.7 boot floppy, and may be used as boot media.
NOTE: This problem was addressed in OSR507MP3, so boot floppies created after
installing that supplement should boot correctly. Boot floppies that
were created prior to installing MP3 can be repaired using /etc/instbb
from MP3 or later, using this syntax:/etc/instbb 135ds18 /dev/fd0