Technical article 126746

What is Support Level Supplement (SLS) OSS673, the OSR 5.0.7 SCSI Floppy Driver supplement?

OpenServer 5.0.7

Written · Last revised

Problem

What problem is fixed by Support Level Supplement (SLS) OSS673A, the OSR 5.0.7 SCSI Floppy Driver supplement?

Solution

OSS673A fixes a problem where the USB floppy drive cannot be accessed by the regular /dev/fd[01] nodes after the deployment of Maintenance Pack 5.

If you run:
# mkdev flopti

and try to mount the node following error is diplayed on console:

WARNING: Sflp: Hard IO error #2, unit 0, req F032166C

The same error is seen when attempting to access the USB floppy via custom.

This supplement can be installed on the following SCO OpenServer releases:

SCO OpenServer Release 5.0.7 with Maintenance Pack 5
----------------------------------------------------------
I. Software Notes and Recommendations

1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative.

----------------------------------------------------------
II. Installation Instructions
To install OSS673A follow these steps:
1. Login as root

2. Create an empty directory, such as /tmp/oss673a, to which the patch will be downloaded.

3. Download the OSS673A patch file VOL.000.000 from
https://ftp.scoexpert.com/openserver5/507/patches/oss673a

to the directory created in step 2.

4. Run the Software Manager with the command:

scoadmin software

or double-click on the Software Manager icon in the desktop.

5. Pull down the "Software" menu and select "Install New".

6. When prompted for the host from which to install, choose the local machine and then "Continue".

7. In the "Select Media" menu, pull down the "Media Device" menu. Select "Media Images", then choose "Continue".

8. When prompted for the "Image Directory", enter "/tmp/oss673a" (or the directory where you placed the OSS673A patch file VOL.000.000 in step 2) and choose "OK."

9. When prompted to select software to install, make sure that
   the "OSS673A" entry is highlighted.  Choose "Install".

10. Installation of Escalation Supplement OSS673A is now complete. To exit the Software Manager, select "Exit" from the "Host" menu.

11. Once the installation has completed, you can remove or archive the downloaded patch, the media image files, and the containing directory created in step 2.

12. You will need to reboot your system for all changes to take effect.

----------------------------------------------------------
III. Removal Instructions

Note: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.

1. Log in as root.
2. Execute the command:
scoadmin software

or double-click on the Software Manager icon in the desktop.

3. Highlight the "OSS673A" entry.

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.

6. You will need to reboot your system for all changes to take effect.

From the Xinuos technical article database, record 126746. Reproduced with permission. The original is at www.sco.com/ta/126746, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.