Problem
What is the SCO OpenServer Perl 5.8.1Ac and where can I download it?
Solution
Download and install the SCO OpenServer Perl 5.8.1Ac supplement from:
https://ftp.scoexpert.com/openserver5/opensrc/perl-5.8.1Ac-------------------------------------------------------------------------I. Software Notes and Recommendations1. This supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer Release 5.0.7 with Maintenance Pack 1 and gwxlibs-1.3.2Ag SCO OpenServer Release 5.0.6 with RS506A, OSS646B and gwxlibs-1.3.2Ag
NOTE: Although not supported by SCO, you can install this supplement on
SCO OpenServer Release 5.0.5 with RS505A, OSS646B and gwxlibs-1.3.2Ag.NOTE: This supplement supersedes Support Level Supplement OSS632b2. Before you install on any release prior to Release 5.0.7, you should have the latest version of Support Level Supplement (SLS) OSS646, the Execution Environment Update, installed.
3. Before you install on any release of OpenServer 5 you will need to install gwxlibs-1.3.2Ag or later. gwxlibs-1.3.2Ag can be downloaded from:
https://ftp.scoexpert.com/openserver5/opensrc/gwxlibs-1.3.2A4. Note that you do not need to remove previous versions of this supplement. This package will automatically upgrade any older versions.
5. If you have questions about this supplement, or the platform it is installed on, please contact your software supplier or support representative.
----------------------------------------------------------------------------
II. Installation InstructionsTo install this supplement follow these steps:
1. Download the media image files from:
https://ftp.scoexpert.com/openserver5/opensrc/perl-5.8.1Ac2. Place the files in the /tmp/perl directory3. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
4. Pull down the "Software" menu and select "Install New".
5. When prompted for the host from which to install, choose the local machine and then "Continue".
6. In the "Select Media" menu, pull down the "Media Device" menu. Select
"Media Images", then choose "Continue".7. When prompted for the "Image Directory", enter "/tmp/perl" (or the directory where you placed the VOL file in step 2) and choose "OK".
8. When prompted to select software to install, make sure that the
supplement entry is highlighted. Choose "Install".9. Installation is now complete. To exit the Software Manager,
select "Exit" from the "Host" menu.----------------------------------------------------------------------------
III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:# scoadmin softwareordouble-click on the Software Manager icon in the desktop.
3. Highlight the Perl 5.8.1 Supplement4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager. Removal is now complete.
----------------------------------------------------------------------------
(C) 2003 The SCO Group, Inc. All Rights Reserved