Technical article 125363

When using the PERC4/Di, PERC4/Si, PERC4/Dc, PERC4/Sc or the PCI PERC4 RAID management software (scomgr/unxwrmgr) the option to reconstruct a drive may fail with a non-descriptive error message.

OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.1.3

Written · Last revised

Problem

When running a logical drive reconstruction using the perc management software (scomgr/unxwrmgr) I get the following error:

Logical Drive Reconstruction Failed
HARDWARE: Dell PERC4/Di RAID controller
          Dell PERC4/Si RAID controller
          Dell PERC4/Dc RAID controller
          Dell PERC4/Sc RAID controller
          Dell PERC4 PCI RAID controller

Cause

This occurs when a background initialization process is
already running on the selected logical disk.  This is
normal behavior, however the error message does not
indicate why the reconstruction failed.

Solution

To reconstruct the logical drive you must first stop the
background initialization process.  To do this, from the
main menu of the manager select the "Initialize" option
and hit the F7 key.  To cancel the background
initialization process hit the escape key.  You should now
be able to go back into the "Reconstruct" menu and start
the reconstruction process.

From the Xinuos technical article database, record 125363. Reproduced with permission. The original is at www.sco.com/ta/125363, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.