Technical article 125382

When using the PERC4/Di, PERC4/Si, PERC4/Dc, PERC4/Sc or the PCI PERC4 RAID management software (scomgr/unxwrmgr) the option to force a physical drive offline displays an error message.

OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.1.3

Written · Last revised

Problem

When selecting the option to "Force Offline" in the scomgr and unxwrmgr utility's Physical Drive menu I see the following error messages:

On OpenServer (scomgr):

Cmd=0xF4 IssueCmd: Cmd not supported Press any key to continue

On UnixWare (unxwrmgr):

F4h - Opcode Not Supported Press any key to continue

HARDWARE: Dell PERC4/Di RAID controller
          Dell PERC4/Si RAID controller
          Dell PERC4/Dc RAID controller
          Dell PERC4/Sc RAID controller
          Dell PERC4 PCI RAID controller

Solution

This error message is harmless and may be safely ignored. After pressing a key the selected drive is forced offline and marked as FAILED.

Dell is aware of this issue and it will be addressed in a future perc driver release.

From the Xinuos technical article database, record 125382. Reproduced with permission. The original is at www.sco.com/ta/125382, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.