Installation ISOs for SCO OpenServer are difficult to find online, so I’ve made the ones I have available for download below. They are hosted on a fast mirror, with the permission of Xinuos.
If you’ve got SCO running and want to keep it useful, the precompiled binaries for OpenServer 5 add modern tools such as curl with TLS, OpenSSH and rsync.
Downloads
| Release | Bootable | Size | Direct download |
|---|---|---|---|
| SCO OpenServer 5.0.0 | No | 355 MB | SCO-OPENSERVER-5_0_0.ISO |
| SCO OpenServer 5.0.4 | No | 385 MB | SCO_OPENSERVER_5_0_4.ISO |
| SCO OpenServer 5.0.5 | Yes | 268 MB | SCO_OPENSERVER_5_0_5.iso |
| SCO OpenServer 5.0.6 | Yes | 380 MB | SCO_OPENSERVER_5_0_6.iso |
| SCO OpenServer 5.0.7 | Yes | 299 MB | SCO_OPENSERVER_5_0_7.iso |
| SCO OpenServer 5.0.7 Supplement CD 5 | 441 MB | osr507suppcd5.iso | |
| Emergency boot floppy | 1.44 MB | SCO-OpenServer-Boot.flp | |
| Emergency root floppy | 1.44 MB | SCO-OpenServer-Root.flp |
Installing OpenServer 5.0.0 in a virtual machine
The 5.0.0 ISO is not bootable. The N0 and N1 disks are in the CD. To install in a virtual machine I also required the updated WD Boot Time Load Driver, then I used the boot string:
restart link="wd" Sdsk=wd(0,0,0) Srom=wd(1,0,0)
OpenServer 5.0.7
The 5.0.7 ISO is available from the Xinuos website but it can be quite slow. The copy above is the same release on a faster mirror, along with Supplement CD 5.
Emergency boot and root floppies
I’ve had a number of requests for emergency boot and root floppy images. The boot and root images are generated from within the operating system and contain the required drivers to access the hard drive controllers of that system. The two images in the table above are the ones I use on VMware with the lsil controller.
To use them to get back into a system, see how to reset the root password on OpenServer 5.