Technical article 127470

Emergency CD media hangs during boot.

OpenServer 6.0.0

Written · Last revised

Problem

I've created emergency cd media using emergency_disk, but it will not boot the system.

HARDWARE: Systems without floppy controllers.

Cause

This problem has been seen on systems without floppy drives.

The fd driver is linked into the kernel by default, but if there is no floppy controller the boot process hangs.

Solution

To correct this problem, use the DCU (device configuration utility) to remove the floppy (FD) driver from the system and re-link the kernel using:

# /sbin/dcu
# /etc/conf/cf.d/link_unix -y

You will also need to create new media after the floppy driver has been removed.

NOTES:    This problem has also been seen when creating other bootable cd
          images with products like Microlite's BackupEdge/RecoverEdge.

Removing the floppy driver from the system and recreating that media should also keep these bootable images from hanging.

See also

TA109259 - "What crash recovery features are provided with SCO Unix?"

http://osr600doc.xinuos.com/en/man/html.ADM/emergency_disk.ADM.html
http://osr600doc.xinuos.com/en/man/html.ADM/dcu.ADM.html
http://osr600doc.xinuos.com/en/HW_dcu/DCU.using.html

From the Xinuos technical article database, record 127470. Reproduced with permission. The original is at www.sco.com/ta/127470, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.