Problem
The default install selected an IDE CD-ROM device for my
KVM UW7D or OSR6D Definitive 2018 Virtual Machine, however,
accessing this device is triggering system hangs. The
Release Notes suggest that a SATA CD-ROM device is needed
for KVM VMs, how can I change my configuration now that it
is already installed? Solution
Make sure that the ahci driver is installed.
pkginfo ahciIf it is not installed, you can load it from the UW7D or OSR6D Definitive DVD image. Either through the KVM Virtual CD device or by storing the ISO inside the VM and mounting it.
If the ISO is connected to the Virtual CD, use:
mount /dev/cdrom/cdrom1 /mntIf the ISO is stored in the VM, use:
mount `marry -a /path/to/ISO/image.iso` /mntOnce mounted, installed the ahci driver using:
pkgadd -d /mnt ahciOnce the ahci driver is loaded on the system, shut it down using:
/sbin/shutdown -y -g0Use virt-manager to modify the configuration of the virtual machine:
Select the VM and click on the light bulb configuration icon.
Select the IDE CDROM device and open advanced options.
Change the "Disk Bus" from IDE to SATASave the changes to the VM and restart it.
Upon bootup, the `sdiconfig -l` command should report that the CD-ROM
device is now using the ahci driver. See also
TA125777 - How can I mount an ISO image on my SCO Unix system?