Technical article 128049

How to add or activate a license in single-user mode

OpenServer 5UnixWare 7

Written · Last revised

Problem

When a license is expired you need to get in single-user mode to add a new license or to activate a license.

Solution

Here a procedure to add or activate a license in single-user mode for Unixware7, Openserver6 and Openserver5 systems.

Unixware7:

Boot the system and view the console screen at boottime. At the Xinuos logo screen, press the spacebar to get to the [boot]:# prompt. Type: [boot]:# INITSTATE=S [boot]:# boot

The Xinuos logo screen will be displayed again, then the system will boot up. Type the root password at: UX:init INFO: SINGLE USER MODE: Type CONTROL-d to proceed with normal startup, (or give root password for Single User Mode):

Type these commands at the # prompt:
         TERM=ansi
         export TERM
Now you can use the License Manager to add a new license
and/or to activate a license:
         scoadmin license
When completed, shutdown the system using the command:
         shutdown now
OpenServer6:

Boot the system and view the console screen at boottime. When the system boots up, press <ENTER> at the Boot [auto boot unix X:XX] screen.

The Xinuos logo screen will be displayed, then the system will boot up. Type the root password at: Type CONTROL-d to proceed with normal startup, (or give root password for system maintenance):

Press <ENTER> at:
         TERM = (ansi)
Now you can use the License Manager to add a new license
and/or to activate a license:
         scoadmin license
When completed, shutdown the system using the command:
         shutdown now
Openserver5:

Boot the system and view the console screen at boottime. When the system boots up, press <ENTER> at the prompt: Boot [ auto boot in X:XX]

Then the system will boot up. Type the root password at: Type CONTROL-d to proceed with normal startup, (or give root password for system maintenance):

Now you can use the License Manager to add a new license
and/or to activate a license:
         scoadmin license
When completed, shutdown the system using the command:
         shutdown now

From the Xinuos technical article database, record 128049. Reproduced with permission. The original is at www.sco.com/ta/128049, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.