Technical article 111021

How to configure Windows as a print server for SCO OpenServer and Open Unix 8/UnixWare 7.

OpenServer 6.0.0OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.0.0UnixWare 7.0.1UnixWare 7.1.0UnixWare 7.1.1UnixWare 7.1.2UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

I want to configure Windows XP-Microsoft Windows NT 4.0 or Windows 2000/2003 Advanced Server as a print server for SCO OpenServer and Open Unix/UnixWare7

Solution

Configuring Windows as a print server for SCO OpenServer and Open Unix8/UnixWare 7 is a two-step process.

First, you must set up Windows as a print server for the Unix Systems.

Then, configure either SCO OpenServer or Open UNIX 8/UnixWare 7 with the Windows printer(s).

I. For the Windows Server to act like a print server for Unix, these two steps must be taken:

(1) Microsoft TCP/IP Printing services need to be installed. To do this, follow these steps:

(a) Click on Start -> Settings -> Control Panel -> Network (b) Click on the tab marked services. (c) Click on Add in the menu. You will see Microsoft TCP/IP Printing. Click ok.

(2) TCP/IP Print server service must be running. To set this up for automatic run, follow these steps:

(a) Click on Start -> Settings -> Control Panel -> Services

(b) Double-click on TCP/IP Print Server. Under Startup Type, click on Automatic.

You will then need to add your printer to your Windows client/server.

II. At this point you will need to configure the printer for your particular SCO operating system.

Take these steps to set up the Windows printer on SCO OpenServer or UnixWare 7.

(1) For SCO OpenServer:

(a) If remote printing is not installed, then root will want to run mkdev rlp.

(b) Start up SCOadmin, and select Printers.

(c) Select Printer Manager.

(d) Select Printer, then Add Remote, then UNIX.

(e) In the Add Remote UNIX Printer, fill out the following:

Host - fill with the name of the Windows host Printer - the Windows printer name

(f) At the command line, run lpstat -t. Make sure the printer is enabled and accepting jobs.

(2) For Open UNIX 8/UnixWare 7:
(a) Start SCOadmin, Printer Setup Manager.
(b) Select Printer, Add TCP/IP Printer.

(c) Fill in the name with what you want to call the printer.

(d) Select the Make/Model.

(e) For Printer Connection Type, select On Remote Server.

(f) Then fill in the following:

Remote System - the Windows system name goes here Remote Printer - the Windows printer name goes here

(g) Click ok.
(h) Then exit out of Printer Setup Manager. Run lpstat -t to
    make sure printer is enabled and accepting jobs.
TROUBLESHOOTING
---------------

- Ensure the firewall is not preventing the print jobs to be processed through.

See also

Manual page for rlp
For more on Windows printing, see:
http://www.ntfaq.com

ta108300, "How do I use SCO VisionFS to print to a Windows printer?"

ta100021, "SCO Advanced File and Print Server Datasheet."

From the Xinuos technical article database, record 111021. Reproduced with permission. The original is at www.sco.com/ta/111021, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.