Technical article 126826

I get the error "volcopy: cannot access /etc/log/filesave.log" when trying to copy a filesystem.

OpenServer 6.0.0

Written · Last revised

Problem

I get the error "volcopy: cannot access /etc/log/filesave.log" when trying to copy a filesystem.

Solution

This problem has been reported to engineering.

To workaround the issue, before you run the volcopy(ADM) command run the following:

ln -s /var/adm /etc/log
> /etc/log/filesave.log

See also

TA126825: volcopy(ADM) fails to copy vxfs filesystems on OpenServer 6.0.0

From the Xinuos technical article database, record 126826. Reproduced with permission. The original is at www.sco.com/ta/126826, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.