Technical article 126419

Installation of osr600mp2 fails. Details show a failure to uncompress.

OpenServer 6.0.0

Written · Last revised

Problem

The installation of MP2 fails.  Listing details show a
message about a failure to uncompress.

Cause

This problem can be caused if your PATH is set to /u95/bin in order to use binaries that are large files (above 2 GB) aware. But when installing the OpenServer 6.0.0 MP2, the installation scripts tries to uncompress the archive files of MP2 that where originally compressed using OSR 6 extended Huffman compress (-H mode). Because of the /u95/bin path is set, the install of MP2 will run the /u95/bin/compress instead of the OSR6 /bin/compress. The /u95/bin/compress does not understand the -H option.

Solution

This has been corrected in mp2, but doesn't take effect until mp2 is installed.

As a workaround to the problem, reset your path to the default before starting the software manager.

PATH=/bin:/etc:/usr/bin;export PATH

See also

TA126237 - I am getting the error "Extraction of files failed" with a detailed error of "UX:compress: ERROR: stdin: not in compressed format"

From the Xinuos technical article database, record 126419. Reproduced with permission. The original is at www.sco.com/ta/126419, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.