Problem
I've downloaded the EFS 7.810 from HP's support website, but the
psp-7.810a-uw7_osr6.tar.Z file only contains a floppy image of the
HBAs (adst70,ciss,hpsas, and mpt). Where can I get these drivers
in CD format?HARDWARE: HP Proliant systems
HP Smart Array controllers Solution
For your convenience a CD ISO image of these drivers has been posted to the SCO Support ftp site at:
ftp://ftpput.sco.com/tmp/support/ISO/psp-7.810a-uw7_osr6-hba.isoThis ISO image can be burned to CD using your favorite CD burning software.
This image was created using the procedure outlined in TA 126675 - "How can I create a CD iso HBA from a floppy HBA image?"
Use the following recommended procedure to install:
1. Get the latest downloadable CD media from:
http://www.sco.com/support/download.html2. Create the ISO CD as indicated above.
3. Install and License any additional software, such as the Development System, from your Installation CD(s).
4. Download and install the CD's of latest Maintenance Pack from:
http://www.sco.com/support/download.htmlOnce you've rebooted ...5. Before you install the HP Extended Feature Supplement (EFS) utilities it is recommended to first create Emergency Recovery Media because the kernel image grows after EFS module installation.
The HP ProLiant Extended Feature Supplement for SCO UnixWare 7.x and SCO OpenServer 6) is included in the psp-7.811a-uw7_osr6.tar pack.
6. Download and install the latest 'sysinfo' from:
http://www.sco.com/support/sysinfo.htmland the latest 'patchck' from:http://www.sco.com/support/patchck.htmlYou can then use this patchck to add all the latest remaining patches to your server if it is connected to the Internet via DNS client resolution in /etc/resolv.conf.
See also
TA126675 - "How can I create a CD iso HBA from a floppy HBA image?"
TA116163 - "How do I Install and Get Started with
UnixWare7/OpenServer6 on an HP/Compaq server or any
Intel/AMD Server platform?"