Technical article 105956

When installing OpenServer 5.0.4 with an Adaptec 2940UW my installation hangs while trying to detect the controller.

OpenServer 5.0.4

Written · Last revised

Problem

When installing the SCO OpenServer operating system, the installation
hangs when trying to detect the Adaptec 2940UW controller.  This
problem seems to manifest itself with versions of the Adaptec 2940
BIOS later than 1.30.  Previous versions of the BIOS such as 1.23
appear to work fine.

Solution

The Boot Time Loadable Driver (BTLD) in Support Level Supplement (SLS) OSS463B corrects this problem and will allow you to install the operating system with BIOS revisions later than 1.30

See also

TA105679, "Problems with the alad driver in OpenServer 5.0.4 is causing my system to hang."

TA105826, "SCO OpenServer 5.0.4 installation hangs during hard disk initialization."

TA105925, "What is SLS OSS463B, the Multiple SCSI Install N0 and BTLD Supplement?

From the Xinuos technical article database, record 105956. Reproduced with permission. The original is at www.sco.com/ta/105956, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.