Problem
Where can I find details of the specific hardware and drivers used in the certification of the ML150 on SCO Operating Systems?
HARDWARE: HP ML150 Series Solution
The HP ML150 range is certified by HP to work on the SCO Unix platform.
Visit http://www.sco.com/chwp and take note of the certification notes of each model by clicking on the "CERTIFIED" link.
This will explain exactly what hardware was used to certify this model and installation instructions.
KNOWN PROBLEMS:
--------------
1) Installing a E200 Smart Array controller is not supported
with this product range, as it is not detailed above, and
will cause a panic with "***** Error - bad opcode" with
OpenServer6 and "PANIC: kernel-mode Address fault on
kernel addres 0" with UnixWare7.2) In ROM-Based Setup Utility (RBSU), under "advanced", "USB Configuration", it is recommended to set the "8042 Emulation Support" to "Enable".
Failing to do that, may cause intermittent keyboard hangs
and other keyboard issues during ISL and post
installation.If you are still having issues with the PS2 Keyboard & Mouse during ISL (hangs) then it is recommended to use a USB Keyboard & Mouse.
Please note, that on the ML150 mainboard, there is a USB to PS2 converter.
This issue has been reported to SCO Engineering as fz534770.
NOTES: These problems have been seen on both the G3 and G5 range of ML150. See also
TA#126499, "What is Support Level Supplement (SLS) OSS703a, the X Server Upgrade for OpenServer 6.0.0 Maintenance Pack 2?" which will now be included in the latest OpenServer6 Maintenance available from:
http://www.sco.com/support/update/download/product.php?pfid=12&prid=20