Problem
Which current OEM storage subsystems are reported to work in single attached or shared Storage or SAN/NAS with or without an HA environment for SCO UnixWare 7 and SCO OpenServer?
Solution
For general NAS Support:
-----------------------
- Any NAS that supports NFS Ver.3, SCO OSR6 & UW714 should be able to
access the NFS exported drives (NFS Filesystem)- Any NAS that supports NFS Ver.2, SCO OSR507 will be able to access the NFS exported drives (NFS Filesystem)
For general SAN & Storage (Shared or Single) Cabinet Support: ------------------------------------------------------------ - In general any storage that supports any supported SAS or SCSI controllers (HBA's) or the following Fibre Controllers on the Server, SCO OpenServer/UnixWare should be able to access the defined logical drives on the SAN/Storage Cabinet:
- Qlogic 2 GB FC: (UW714 & OSr6 Only) PCI-X SANBlade
QLA2340, QLA2342, QLA2344, QLA2340L,
QLA2310, QLA2310F, QLA2310FLusing the "qlc2300" HBA driver.The HP Model Numbers for the above controllers are:
HP StorageWorks FCA2214 Fibre Channel HBAP/N 281541-B2 or the HP StorageWorks FCA2214DC (DualChannel) FibreChannel HBA P/N 321835-B21
- LSI Logic 2 GB: (UW714, OSR6 & OSR507)
LSI 7102XP-LC, LSI 7202XP-LCThere is no SCO Unix management agent for the SAN's, etc to monitor
the status of the allocated logical drives. This could be
provided by a SAN or Storage Cabinet Managment Console.Support for 4GB Qlogic FCAL is under development.
There is no support for Emulex HBA controllers.
'mpio' should work in this environment and is not certified on any particular hardware configuration.
For SAN's:
---------
- The following SAN's have been reported by SCO field engineers and
customers and are known to work with SCO Unix although they may
not be officially certified or supported:- IBM (OSR6 UW714): DS4800, DS4700, DS4500, DS4400 and DS4200
- EMC (certain Models)- HP EVAMost SAN's have the ability to drop their speed negotiation to a 2GB level for the above Fibre controllers.
For Built-In SAN's:
------------------
See the Intel Modular Server (MFT).Basically, its up to 6 diskless blades, 14 disks and a SAN in a single chassis.
Its certified with SCO OpenServer 6.0.0 and UnixWare 7.1.4.
See:For more information on the box including video:
http://www.intelmodularserver.com/Videos/index.htmland the ability to test drive a system via its browser based consle:
http://www.intelmodularserver.com/Test_Drive/index.htmland:http://www.intelmodularserver.com/http://www.intel.com/products/server/modular-server/modular-server/modular-server-overview.htmFor Shared Storage Cabinets:
---------------------------
In general, shared storage cabinets should follow the hardware
specification for multi-initiator, laid out in:TA#110205, "Information about UnixWare 7 ReliantHA and filesystem access in a multi-initiator environment. "
and:TA#110245, "UnixWare, What hardware is required for ReliantHA clustering? "
Such storage cabinets can be used in either a shared or single attached environment.
- For the shared storage cabinet environment, the following current OEM storage subsystems are reported to work in a shared storage multiple node HA environment:
HP: MSA 1500 (FCAL), MSA1000 (FCAL) and MSA500-G2 (SCSI)
- The HP MSA1500, MSA1000 and MSA500-G2 have been officially certified to work in a ReliantHA environment with SCO UnixWare 7.1.3 and 7.1.4.
- The certification for SCO UnixWare 7.1.4 and SCO OpenServer 6 was performed with the HP StorageWorks FCA2214 HBA (single or dual channel). The driver is the SCO supplied qlc2300.
- You can also find this information at:
http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.html- HP MSA1500 (SCSI and SATA ONLY):
http://h18000.www1.hp.com/products/quickspecs/11945_div/11945_div.htmlhttp://h18000.www1.hp.com/products/quickspecs/11945_div/11945_div.html#Family%20Comparison- HP MSA2000 (SAS and FIBRE ONLY):
For connecting an HP MSA2000 (MSA2000FC or MSA2000SA) as either a stand-alone or in a shared storage environment then please contact your SCO Support provider or SCO Sales Account Manager.
- The others below are reported by SCO field engineers and customers to work in a HA environment but not been officially certified or would be supported by SCO:
- DELL: PowerVault 220s (SCSI) and PowerVault 221S- Fujitsu Siemens Computers FSC: PRIMERGY SX30 Cluster Module (SCSI)
- Xyratex F5402E Cabinet (F5402E 4Gb FC-SAS/SATA RAID)For Single Storage Cabinets:
---------------------------
In general, if the disks connected to an external storage device are
detected by the controller's BIOS during boot-up then SCO Unix
should be able to access them as normal disks.- For HP's Single external cabinets, such as the MSA20, MSA30, MSA50, MSA60 & MSA70, see:
http://h71028.www7.hp.com/enterprise/cache/499307-0-0-0-121.htmland:
http://h18006.www1.hp.com/storage/disk_storage/msa_diskarrays/drive_enclosures/index.html- The others below are reported by SCO field engineers and customers to work in a single cabinet environment but not been officially certified or would be supported by SCO:
- Legacy support for RA4000, RA4100 and general JBOD External Storage Proliant or other OEM cabinets are not detailed here.
NOTES: For full information on the Storage Technologies certified by SCO and
our partners visit http://www.sco.com/chwp and click on either
OpenServer or UnixWare then Storage Technologies and select ALL.NOTES: SCO offers the following High Availabililty solutions:- ReliantHA available for SCO UnixWare 7.1.4See: http://www.sco.com/products/clustering/reliantha.html- SCO's manual fail-over solution, provided by SCO Professional Services
See: http://www.sco.com/consulting/clustering/ andhttp://uk.sco.com/services/NOTES: There is currently no support for 'iSCSI' connectivity with the SCO
operating systems.NOTES: Troubleshooting:
---------------
When connecting external storage, see:TA#116163, "How do I Install and Getting Started with UnixWare7/OpenServer6 on an HP/Compaq server? "
TA#119088, "How do I Install and Getting Started with OpenServer5 on an HP/Compaq server? "
In general, you add the disk as you would any other.
For example, with UnixWare7/OpenServer6:Once connected a disk should be advertised in the "sdiconfig -l" list, for example as:
5:0,7,0: HBA : (qlc2300,1) QLogic QLA2300 <-SAN (SuN emulation)
0,0,0: DISK : IBM 1814 FAStT 0916 <-File System
0,0,1: DISK : IBM 1814 FAStT 0916 <-File SystemRunning "prtconf" should show the disk size:
Disk Drive 2 - IBM - 1814 - 138329 MBIf so, then you should be able to add using "diskadd".
If not, then you may need to check you are using:
- the latest firmware of the connecting controller, - the latest operating system maintenance, - the latest driver for the connecting controller, - the BIOS is 'enabled' for the connecting controller so the disk(s) are seen in the BIOS during the boot sequence, - check the configuration of the cabinet to check the Initiator ID for each controller, - if you can run 'fdisk' on one node and see the disk but not on the other then try to run "diskadd" and add the appropriate slices from a second node, with the first node turned off, to ensure the disk is correctly stamped on each controller. Then try accessing with both nodes turned on.
See also
TA#116163, "How do I Install and Getting Started with UnixWare7/OpenServer6 on an HP/Compaq server? "
TA#119088, "How do I Install and Getting Started with OpenServer5 on an HP/Compaq server? "
TA114263, "How do I replace an array of disks defined as a logical drive on a RA4x00 Fibre (Compaq Fibre Channel casa) which is being mirrored by ODM to another logical drive? "
TA#114863, "My disk arrays are mirrored but one of the disk cabinets has been powered down. How will Online Data Manager (ODM) react? "
TA#113681, "The Compaq CASA Fibre Channel driver is reporting wrong logical drive ID information to the UnixWare 7 kernel resulting in missing logical disks in the kernel level. "
TA#126818, "UW714:Can I install on an IBM Blade Server HS20?"
TA#126836, "Will SCO OpenServer 6.0.0 and UnixWare 7.1.4 work with IBM IBM System Storage DS4700 Express?"
TA#126628, "How can I get a DELL PowerVault 220S / 221S Storage
Subsystem to work in an HA shared storage environment
under SCO Operating Systems?"TA#126627, "How can I get a Fujitsu Siemens Computers' PRIMERGY
SX30 Cluster Storage Subsystem to work in an HA shared
storage environment under SCO OpenServer 6.0.0 and SCO
UnixWare 7.1.3 / 7.1.4?"TA#110205, "Information about UnixWare 7 ReliantHA and filesystem access in a multi-initiator environment. "
TA#110245, "UnixWare, What hardware is required for ReliantHA clustering? "