Technical article 126836

Will SCO OpenServer 6.0.0 and UnixWare 7.1.4 work with IBM IBM System Storage DS4700 Express?

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

Will SCO OpenServer 6.0.0 and UnixWare 7.1.4 work (Connect) with IBM System Storage DS4700 Express?

HARDWARE: IBM System Storage DS4700 Express
          http://www-03.ibm.com/systems/storage/disk/ds4000/ds4700/

Solution

The IBM DS4700 Storage system is a Fibre system.

Therefore the following Qlogic Fibre controller has been reported by SCO Field engineers to have worked with the IBM DS4700 Storage system:

Model   Bus Type Bus Speed IO Rate  Ports  Media Type
-----   -------- --------- -------  -----  ----------
QLA2340   PCI-X     133     2 GB    Single  Optic
QLA2342   PCI-X     133     2 GB    Dual    Optic
QLA2344   PCI-X     133     2 GB    Quad    Optic
QLA2340L  PCI-X     133     2 Gb    Singel  Optic Low Profile
QLA2310   PCI-X     66      2 Gb    Singel  Copper
QLA2310F  PCI-X     66      2 Gb    Singel  Optic
QLA2310FL PCI-X     66      2 Gb    Singel  Optic Low Profile
http://www.qlogic.com/products/fc_san_hostadapers.asp

Using the "qlc2300" HBA driver 802a that is available on the UW714 & OSR6 install media.

NOTES:    From the IBM DS4700 Storage Manager (accessed via a LAN
          web interface from a windows PC), you need to set the
          "Host Type" as "linux"  where the Logical Volumes is
          allocated to.

If you leave it as "default", then OSR6 and UW714 "sdiconfig -l" will detect many Virtual logical volumes from the DS4700 and you will get confused.

Note: This IBM DS4700 Storage can also be used in a Shared Storage environment like ReliantHA

From the Xinuos technical article database, record 126836. Reproduced with permission. The original is at www.sco.com/ta/126836, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.