Technical article 126631

Which Intel Chipsets "SATA-AHCI" does the SCO UnixWare 7.1.3 / 7.1.4 and OpenServer 6.0.0 "ahci" driver support?

OpenServer 6.0.0UnixWare 7.1.3UnixWare 7.1.4

Written · Last revised

Problem

Which Intel Chipsets, Advanced Host Controller Interface "AHCI" with advanced Serial ATA features such as Native Command Queuing, does the SCO OpenServer 6.0.0, UnixWare 7.1.3 and 7.1.4 "ahci" driver release 1.2 support?

Solution

Any Type of SATA controller that can emulate a legacy IDE controller, (set in the BIOS of the server) should work on SCO OSR507 with it's IDE driver 'wd' and on OSR6/UW714 with it's 'ide' drivers.

However, any Type of SATA controller that is based on Intel ICH6M, ICH6R, ICH7M and ICH7R chip with AHCI 1.0 specification, SCO OSR6/UW714's 'achi' driver should work on them (Native AHCI)

Please Note that native 'ahci' is faster then 'ide'.

Within the BIOS of the server, generally, enabling the SATA
controller to be "Legacy" will enable you to use the "ide" driver and
"Enhanced" should enable you to use the "ahci" driver if the
criteria below is met.  Lastly, if you select "RAID Enabled" then
there is NO Support for SCO.  The recommendation, if RAID is
required is to either purchase a Supported RAID Controller or use
OnLine Disk Mirroring (ODM), ie. Software RAID.

- The Following Intel SATA chipsets are supported:

Intel 82801GBM I/O Controller Hub (ICH7M) - AHCI only
Intel 82801GR I/O Controller Hub (ICH7R)  - AHCI only (No RAID)
Intel 82801GH I/O Controller Hub (ICH7DH) - AHCI only (No RAID)
Intel 82801FR I/O Controller Hub (ICH6R)  - AHCI only (No RAID)
Intel 82801FBM I/O Controller Hub (ICH6M) - AHCI only

- The Following Intel SATA chipsets are also known to work:

8086 2829  82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Intel S3210SHLX - ICH9 and ICH9R (No RAID)
MSI P45 Neo3    - ICH10R (No RAID)

- The Following Intel SATA chipsets are NOT supported:

Intel 82801HR/HH/HO I/O Controller Hub (ICH8R) - RAID and AHCI Any Intel ICH8 & ICH8R based chipsets Intel 631xESB/632xESB I/O Controller Hub - RAID and AHCI Intel 82801GHM I/O Controller Hub (ICH7MDH) - RAID only Any Intel ICH5 and ICH5R-based chipsets JMicron 363 chipsets

NOTE:     No SATA controllers that advertise HostRAID technology are supported
          under SCO UNIX.
NOTE:     There is no SATA Raid / AHCI driver available for OSr5.0.7.

The only option would be to install with the latest wd(v3) driver with the SATA chipset in Legacy IDE Mode (RAID & AHCI mode disabled) This should allow the SATA Disks and SATA DVD-ROM to be available only in Legacy IDE Mode.

See also

TA126135: Host Bus Adapter (HBA) Driver Supplement - ahci Driver version 1.1

Visit this Intel URL link for more information: http://www.intel.com/support/chipsets/imst/sb/CS-012304.htm

From the Xinuos technical article database, record 126631. Reproduced with permission. The original is at www.sco.com/ta/126631, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.