Technical article 127175

Why is the printer connected to my PCI Parallel port printing slowly?

OpenServer 6.0.0

Written · Last revised

Problem

Printing through my PCI Parallel port is very slow.

HARDWARE: This issue has been seen on selected Dual and Multiple core systems.

Solution

This problem has been known to be corrected by setting the boot parameter:

ACPI=X

To make this change permanent, add this parameter to your boot file: /etc/default/boot

See also

TA 126151 - How can I add and configure a parallel port card on my existing OpenServer 6.0.0 system?

From the Xinuos technical article database, record 127175. Reproduced with permission. The original is at www.sco.com/ta/127175, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.