Technical article 126083

Broadcom latest SCO OpenServer bcme driver version 10.4.3 fails to initialize and load on systems with BCME 57XX NICs

OpenServer 6.0.0OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.1.1UnixWare 7.1.3UnixWare 7.1.4Open UNIX 8

Written · Last revised

Problem

I have downloaded the latest Broadcom SCO OpenServer 5 bcme driver ver. 10.4.3 from broadcom website:

http://www.broadcom.com/support/ethernet_nic/netxtreme_server.php?archive=1

Or used the SCO certified bcme driver version 8.1.8 that is available in OpenServer 5.0.7 Supplement CD 4:

http://www.sco.com/support/update/download/release.php?rid=120

The driver installs fine under Openserver 5.0.7 and scoadmin network configuration manager detects the Broadcom NIC bcme 7521.

But, after reboot, the OSr507 kernel fails to load the driver with this message:

WARNING: bcme : This driver does not support ASF.  Instructions on
how to disable this feature are in the readme.txt file included in
the BRCMbcme package.
%bcme0    0xFFFF-0xFFFE   -  -  Get adapter info failed
%bcme0    0x0000-0xFFFF   -  -  Adapter not present

And the system will end up with non-functional networking.

Earliar releases of the bcme driver from Broadcom / SCO work fine with the BCME 57XX NICs.

Cause

The ASF "Alert Standard Format" being enabled in the firmware. This Broadcom driver does not support ASF.

More information about ASF:
http://www.dmtf.org/standards/documents/ASF/DSP0136.pdf

Solution

You need to disable the ASF feature in the firmware of the BCME 57XX.

To do that:

1. Remove the configured NiC from "netcfg" or "netconfig".

2. Download the BCM57xx User diagnostic from Broadcom download site at :

http://www.broadcom.com/drivers/downloaddrivers.php
or can be downloaded from:
ftp://ftpput.sco.com/tmp/support/utils/bcme/B57udiag-15.23.iso

and follow the instructions there to create a bootable dos cdrom and boot from it. At the time of this writing, that is

How to run User Diagnostic for a BCM57xx NetXtreme Device:

1. Create a bootable CD using the b57udiag ISO file 2. Boot to DOS using this CD 3. Choose option one on the FreeDOS 1.0 Final Cut CD menu 4. Choose option "Install to HD using FD setup 5. Run FreeDOS from CD ROM (return to command prompt) 6. cd to b57udiag and run b57udiag

*Note*: step 6 will run the diagnostics which aren't necessary here. You just want to invoke the b57udiag command prompt as described below.

3. Enter "b57udiag -cmd"
*Note*: if you have multiple cards you can switch between them
using the `device #` command.  For example, to switch to the
second card use:
0:> device 1
1:>

To switch back to the first card use:

1:> device 0
0:>

4. At the 0:> prompt, enter: 0:> setasf -d (where -d is for disable ASF from firmware)

0:> setasf ? (for more options on this command)

5. Reboot the system.

6. Re-add the NiC within "netcfg" or "netconfig" and reboot if necessary.

Now SCO Unix will successfully load the driver, find and should initialize the BCME 5721 NIC:

For OpenServer 5.0.7:
%bcme0  -   11  -  chip=BCM5721 mem=F0300000 addr=00:30:05:40:8a:fb
NOTICE: bcme0: Firmware version 5721-v3.29a
NOTE:  If you are seeing this error with OpenServer 5.0.7:
name=bcme0 vec=- dma=- ADAPTER NOT INITIALIZED
make sure that you did install the latest driver from Broadcom's website.
TROUBLESHOOTING:

If the above fails then it may be necessary to either:

a) Remove and re-add the NiC within "netconfig"

b) Disable any onboad HP iLO card technology which may be conflicting with the NiC.

c) Consider installing a PCI NiC solution.

From the Xinuos technical article database, record 126083. Reproduced with permission. The original is at www.sco.com/ta/126083, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.