Technical article 126925

Cabling requirements for IDE CD/DVD Players and Burners

OpenServer 6.0.0OpenServer 5.0.6OpenServer 5.0.7UnixWare 7.1.3UnixWare 7.1.4

Written · Last revised

Problem

CD/DVD burners / Players will be recognized at bootup by the server BIOS but will stop and freeze randomly during SCO OS.

Cause

This is caused by cable noise on faster systems using a 40 conductor IDE cable

Solution

With new drives it is necessary to use the new Ultra-DMA 80 conductor IDE cables rather than the old style 40 conductor cable. The new cables still have standard 40 pin connectors but provide separate ground leads for each pin. This both reduces noise on the cable and end of cable data reflections which cause data errors during transmission.

The new cables typically have blue IDE connectors and the conductors are significantly thinner than those on the standard cable or a floppy ribbon cable.

Motherboards supporting these cables will also typically have blue IDE connectors on the motherboard.

From the Xinuos technical article database, record 126925. Reproduced with permission. The original is at www.sco.com/ta/126925, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.