Technical article 126160

Cannot use a modem serial port for both dialin and dialout on OpenServer 6.0.0

OpenServer 6.0.0

Written · Last revised

Problem

I get a "cannot access device" error when I attempt to dial out on a line that has a getty/login running on it. I do not have a problem dialing out on the line if I disable it for dialin.

Solution

This problem has been reported to SCO Engineering and is fixed in Maintenance Pack 2.

NOTE:     In addition, any application of 'getty' that requires that DCD
          should not be dropped at startup should add the hidden -r option to
          getty arguments; this tells it not to change line modes or drop
          carrier.

From the Xinuos technical article database, record 126160. Reproduced with permission. The original is at www.sco.com/ta/126160, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.