Problem
I have a Server with Adaptec ASC-44300 4 port SAS HostRaid controller and want to install SCO UnixWare 7.1.4 or OpenServer 6.0.0.
I have 2x Seagate 160G SATA drives in a RAID-1 (HostRaid) configuration.
I am using the "adp94xx" HBA driver from SCO Website ver. 1.4 (IHV ver. 1.4.11658):
http://www.sco.com/support/update/download/release.php?rid=236Loading the "adp94xx" HBA during ISL was fine and the 160 GB Logical (Raid-1) drive was detected.
In ISL, I have created a 150 GB Data filesystem.
The problem is that the creation of the filesystems is taking very very long time (even days).
If I create filesystems below 146 GB in size, then the creation of filesystems take few seconds.
Is there some sort of filesystem size limitation in the "adp94xx" HBA ver. 1.4 driver?
HARDWARE: Adaptec ASC-44300 4 port SAS 64 bit/133 MHz
Adaptec ASC-48300 8 port SAS 64 bit/133 MHz
Adaptec ASC-58300 8 port SAS 64 bit/133 MHz
Adaptec AIC-9405 Chipset 4 port SAS
Adaptec AIC-9410 Chipset 8 port SAS
Adaptec AIC-9412 Chipset 8 port SASOr any OEM Server vendor using the above controllers.
All above are with HostRaid. Cause
The "adp94xx" HBA driver 1.4 (IHV=1.4.11658) has issues addressing UW714 & OSR6 filesystems above 146 GB in size.
Solution
Download the latest "adp94xx" HBA driver from Adaptec website ver. 1.4.11662.
This driver fixes the 146 GB filesystem size limitation:
http://www.adaptec.com/en-US/speed/sas/unix/adp94xx_openserver6_unixware7_b11662_i386_tar_gz.htm