Problem
The Commonwealth Games are being held in Melbourne, Australia in March 2006. To minimize the disruption, Australian states that observe Daylight Saving Time (DST) have been asked to extend DST from March 26 to April 2.
The states that observe DST in Australia are ACT, New South Wales, Victoria, South Australia, Tasmania and Lord Howe Island.
OpenServer 5 customers will need to update their Timezone settings to cater for this change.
Solution
To update the default system timezone on a server you will need to modify the /etc/TIMEZONE file. For an explanation of the syntax of this file please see timezone(F).
If you are in ACT, New South Wales, Victoria or Tasmania
(OpenServer 5 treats these states collectively as Eastern
Australian Time/EST) then you should edit your
/etc/TIMEZONE file, comment out the existing TZ line by
adding a # at the beginning of the line and add a new line
with:TZ='EST-10EDT,M10.5.0/2,M4.1.0/3'If you are in South Australia (Central Australian Time/CST) then comment out the existing TZ line by adding a # at the beginning of the line and add a new line with:
TZ='CST-9:30CDT,M10.5.0/2,M4.1.0/3'If you are on Lord Howe Island then comment out the existing TZ line by adding a # at the beginning of the line and add a new line:
TZ='LHST-10:30LHDT-11,M10.5.0/2,M4.1.0/2:30'Please note that the server must be rebooted before the TIMEZONE change will take effect.
Please also note that customers will need to change their timezone again in 2007 before the end of March so that their systems will again switch from DST on the correct day.
To do this, edit your /etc/TIMEZONE file, comment out the TZ line that you added above and uncomment the previous TZ line.
If you are unsure as to what your TZ entry should be then for Eastern Australian Time (EST) please use:
TZ='EST-10EDT,M10.5.0/2,M3.5.0/3'For Central Australian Time (CST) please use:
TZ='CST-9:30CDT,M10.5.0/2,M3.5.0/3'and for Lord Howe Island Time please use:
TZ='LHST-10:30LHDT-11,M10.5.0/2,M3.5.0/2:30'Again you will need to reboot the server for the changes to take effect.
NOTE: This solution is also applicable to earlier releases of SCO
OpenServer Release 5 and SCO Unix/ODT.