Problem
My system has two internal CDROM drives (IDE) and one external USB drive (CDROM, DVD, REV). When booting off of the OpensServer6 CD when switching to the console the first thing that happens, is that the USB device is recognized. For example in the following instance a USB REV drive is attached
0:0,7,0 HBA usb_msto
0,0,0:CDROM Iomega REVWhen continuing booting the internal CDROMs get recognized as
2:0,2,0
0,0,0: CDROM bla
0,1,0: CDROM blaWhen prompted from where to install I select "Install from CDROM". Immediately I get an error message saying, that this is not the OpenServer6 Installation CD. When disconnecting the USB drive it takes a couple of seconds and the installation continues.
Cause
USB devices are enumerated before IDE cdrom drives. Therefore the installation will try to use the USB device to boot from.
Solution
There are a couple of possible solutions here:
1. Remove the media from the USB drive during ISL (before the "Identifying the installation media device" screen). 2. If the device is IDE vs USB, configure it as the secondary cdrom so that the primary cdrom will be checked for media and mounted first. 3. Plug off the USB device before ISL. You can plug it in after the installation has finished.