Technical article 126960

Hardware Flow control (RTS/CTS) not working with CUPS on OpenServer 6.0.0

OpenServer 6.0.0

Written · Last revised

Problem

I am trying to configure a serial printer with CUPS. I would like to use Hardware Flow control using RTS/CTS but if the printer goes offline (and drops DTR) the CUPS print subsystem continues to send data down the line to the printer.

Cause

There is a bug in the way that CUPS handles Hardware Flow control on OpenServer 6.0.0.

Solution

This problem has been reported to SCO Engineering.

As a workaround you can configure Serial Printing with
Hardware Flow control using the System V lp subsystem. For
more details on configuring serial printers with System V
lp please see:
http://osr600doc.xinuos.com/en/HW_printer/printers_installing
_parallel_and_serial.html

From the Xinuos technical article database, record 126960. Reproduced with permission. The original is at www.sco.com/ta/126960, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.