Problem
What is the HBA Driver Supplement adp94xx Driver version 1.0 for OpenServer 6.0.0 and UnixWare 7.1.4?
Solution
The adp94xx Driver Supplement provides the following driver:
adp94xx - Adaptec SAS HostRAIDThis, the first released version of the adp94xx driver, provides support for Adaptec Serial Attached SCSI HostRAID Host Adapters and chipsets. The complete list of supported hardware is detailed below.
This driver can be used during fresh installation of any supported OpenServer 6/UnixWare 7 system or can be applied to an existing system.
The following driver is included in hba.adp94xx.1.0.image:
adp94xxThis image is available at the following URLs:
https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/driversHARDWARE:HBA hardware supported by adp94xx 1.0:Adapter Type
---------------------------------- ------------
Adaptec Serial Attached SCSI 48300 8 ports, 64 bit/133 MHz
Adaptec ACI-9410 Chipset 8 ports, 64 bit/133 MHz
Adaptec ACI-9412 ChipsetNOTE: Native Hot-Plug support on UnixWare Release 7.1.4 requires
Maintenance Pack 3. Without the proper Maintenance Pack
installed, Native Hot-Plug is not supported.Maintenance Pack 3 for UnixWare 7.1.4 is available. Please see:
http://www.sco.com/support/download.html-------------------------------------------------------------------------
I. InstallationWhile installing OpenServer 6/UnixWare 7 be sure to insert the adp94xx Driver Supplement diskette before any HBA drivers supplied with your media kit. Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA floppy from this image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.adp94xx.1.0.image file to the newly created /tmp/hba directory on your machine.
3. Make an adp94xx HBA diskette from the image file using these command:
# dd if=hba.adp94xx.1.0.image of=/dev/dsk/f0t obs=36b4. Use this adp94xx HBA diskette during system installation.
------------------------------------------------------------------------
II. Upgrading drivers on existing OpenServer 6/UnixWare 7 systemThe adp94xx HBA diskette can also be used to upgrade the adp94xx driver on your system using the following command:
1. Insert the HBA driver diskette and type the command:
# pkgadd -d diskette1 allor# pkgadd -d diskette1 adp94xx------------------------------------------------------------------------
III. Software NotesThis driver has been tested with and is supported on:
SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0