Problem
HBA Driver Supplement adp94xx Driver version 1.0 for OpenServer 6.0.0 and UnixWare 7.1.4 does not support RAID10 properly. It also causes a problem in the sdiconfig -l output.
Solution
The adp94xx Driver Supplement provides the following driver:
adp94xx - Adaptec SAS HostRAID Version 1.1Version 1.1 of the adp94xx driver has the following changes:
Fixes to support RAID10 properly.Fixes to correct sdiconfig -l output.This driver can be used during fresh installation of any supported OpenServer 6/UnixWare 7 system or can be applied to an existing system.
The adp94xx driver is provided in both hba.adp94xx.1.1.image, a dd image of an HBA floppy and hba.adp94xx.1.1.iso, an ISO image of an HBA CDROM.
Both images are available at the following URLs:
https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/driversHARDWARE:HBA hardware supported by adp94xx 1.1:Adapter Type
---------------------------------- ------------
Adaptec Serial Attached SCSI 48300 8 ports, 64 bit/133 MHz
Adaptec ACI-9410 Chipset 8 ports, 64 bit/133 MHz
Adaptec ACI-9412 ChipsetNOTE:Native Hot-Plug support on UnixWare Release 7.1.4 requires
Maintenance Pack 3. Without the proper Maintenance Pack
installed, Native Hot-Plug is not supported.Maintenance Pack 3 for UnixWare 7.1.4 is available. Please see:
http://www.sco.com/support/download.html-------------------------------------------------------------------------
I. InstallationWhile installing OpenServer 6/UnixWare 7 be sure to insert the adp94xx Driver Supplement media before any HBA drivers supplied with your media kit.
Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA floppy from the HBA floppy image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.adp94xx.1.1.image file to the newly created /tmp/hba directory on your machine.
3. Make an adp94xx HBA diskette from the image file using this command:
# dd if=hba.adp94xx.1.1.image of=/dev/dsk/f0t obs=36b4. Use this adp94xx HBA diskette during system installation.
Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA CD from the HBA ISO image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.adp94xx.1.1.iso file to the newly created /tmp/hba directory on your machine.
3. Make an adp94xx HBA CD from the iso file using this command:
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99
hba.adp94xx.1.1.isowhere c,b,t is taken from the output of cdrecord --scanbus
4. Use this adp94xx HBA CD during system installation.
------------------------------------------------------------------------
II. Upgrading drivers on existing OpenServer 6/UnixWare 7 systemThe adp94xx HBA diskette can also be used to upgrade the adp94xx driver on your system using the following command:
1. Insert the HBA driver diskette and type the command:
# pkgadd -d diskette1 allor# pkgadd -d diskette1 adp94xxThe adp94xx HBA CD can also be used to upgrade the adp94xx driver on your system using the following command:
1. Insert the HBA driver CD and type the command:
# pkgadd -d cdrom1 allor# pkgadd -d cdrom1 adp94xx------------------------------------------------------------------------
III. Software NotesThis driver has been tested with and is supported on:
SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0