Technical article 126677

Host Bus Adapter (HBA) Driver Supplement - adp94xx Driver version 1.4

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

The adp94xx Driver version 1.4 fixes the following issues:

HBA Driver Supplement adp94xx Driver version 1.2 for OpenServer 6.0.0 and UnixWare 7.1.4 PANICs when a target error occurs.

HBA Driver Supplement adp94xx Driver version 1.1 for OpenServer 6.0.0 and UnixWare 7.1.4 does not support the Adaptec Storage Manager application.

HBA Driver Supplement adp94xx Driver version 1.0 for OpenServer 6.0.0 and UnixWare 7.1.4 does not support RAID10 properly. It also causes a problem in the sdiconfig -l output.

Solution

The adp94xx Driver Supplement provides the following driver:

adp94xx - Adaptec SAS HostRAID Version 1.4

NOTE: There is no version 1.3 of this driver.

This version of the adp94xx driver provides support for Adaptec Serial Attached SCSI HostRAID Host Adapters and chipsets. The complete list of supported hardware is detailed below.

This driver can be used during fresh installation of any supported OpenServer 6/UnixWare 7 system or can be applied to an existing system.

The adp94xx driver is provided in both hba.adp94xx.1.4.image, a dd image of an HBA floppy and hba.adp94xx.1.4.iso, an ISO image of an HBA CDROM.

Both images are available at the following URLs:

https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/drivers

The Adaptec Storage Manager for SCO OpenServer 6 and UnixWare 7 is only available directly from the Adaptec website. Here is the URL:

http://www.adaptec.com/en-US/speed/sas/storage_manager/asm-openserver6-unixware7-v4_30_16042_tar_gz.htm

HARDWARE: HBA hardware supported by adp94xx 1.4:

Adapter                    Type
------------------------   ------------
Adaptec ASC-44300 HBA      4 port SAS/SATA, 64 bit/133 MHz
Adaptec ASC-48300 HBA      8 port SAS/SATA, 64 bit/133 MHz
Adaptec ASC-58300 HBA      8 port SAS/SATA, 64 bit/133 MHz
Adaptec AIC-9405 Chipset   4 port SAS/SATA
Adaptec AIC-9410 Chipset   8 port SAS/SATA
Adaptec AIC-9412 Chipset   8 port SAS/SATA
NOTE:     Native Hot-Plug support on UnixWare Release 7.1.4 requires
          Maintenance Pack 3.  Without the proper Maintenance Pack
          installed, Native Hot-Plug is not supported.

Maintenance Pack 3 for UnixWare 7.1.4 is available. Please see:

http://www.sco.com/support/download.html
-------------------------------------------------------------------------
I. Installation

While installing OpenServer 6/UnixWare 7 be sure to insert the adp94xx Driver Supplement media before any HBA drivers supplied with your media kit.

Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA floppy from the HBA floppy image file.

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.adp94xx.1.4.image file to the newly created /tmp/hba directory on your machine.

3. Make an adp94xx HBA diskette from the image file using this command:

# dd if=hba.adp94xx.1.4.image of=/dev/dsk/f0t obs=36b

4. Use this adp94xx HBA diskette during system installation.

Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA CD from the HBA ISO image file.

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.adp94xx.1.4.iso file to the newly created /tmp/hba directory on your machine.

3. Make an adp94xx HBA CD from the iso file using this command:

# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.adp94xx.1.4.iso

where c,b,t is taken from the output of cdrecord --scanbus

4. Use this adp94xx HBA CD during system installation.

------------------------------------------------------------------------
II. Upgrading drivers on existing OpenServer 6/UnixWare 7 system

The adp94xx HBA diskette can also be used to upgrade the adp94xx driver on your system using the following command:

1. Insert the HBA driver diskette and type the command:

# pkgadd -d diskette1 all
or
# pkgadd -d diskette1 adp94xx

The adp94xx HBA CD can also be used to upgrade the adp94xx driver on your system using the following command:

1. Insert the HBA driver CD and type the command:

# pkgadd -d cdrom1 all
or
# pkgadd -d cdrom1 adp94xx
------------------------------------------------------------------------
III. Software Notes

This driver has been tested with and is supported on:

SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0

From the Xinuos technical article database, record 126677. Reproduced with permission. The original is at www.sco.com/ta/126677, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.