Technical article 127020

Host Bus Adapter (HBA) Driver Supplement - adpu320 Driver Release 8.0.1a

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

What is adpu320 Driver Supplement Release 8.0.1a, the Adaptec
Ultra320 Family PCI SCSI IHV HBA for OpenServer 6.0.0 and UnixWare
7.1.4?

Solution

The apu320 Driver Supplement Release 8.0.1a provides the following updated driver:

adpu320 Release 8.0.1a (IHVVERSION d3.0)
hba.adpu320.8.0.1a.image - Image of the adpu320 Release 8.0.1a
HBA diskette.  This can be used during fresh installation of
any supported UnixWare 7 or OpenServer 6 system.

This image is available at the following URLs:

https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/drivers

This driver supports the following HBA hardware:

Adapter                    Chip                      Type
----------------------   ------------                -------------
AHA29320x, AHA39320x     AIC-7901A, AIC-7902A4       Ultra320 SCSI

Version 8.0.1a of the adpu320 driver incorporates the following changes:

1. During an init state change, the adpu320 driver would cause a panic. fz528975

2. A passthru REQUEST SENSE command would fail if the allocation length was greater than 18 bytes. fz529174

3. Netvault fails with an Underrun/Overrun error. fz529174

4. Eliminate a NULL pointer deference error that caused kernel panics under certain conditions, such as when using the adpu320 HBA with an optical jukebox. fz534840

5. Fix a lock hierarchy violation.
   fz534036
I. Installation

While installing UnixWare 7 or OpenServer 6 be sure to insert the adpu320 Driver Supplement diskette before any HBA drivers supplied with your media kit.

Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA floppy from the HBA floppy image file.

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.adpu320.8.0.1a.image file to the newly created /tmp/hba directory on your machine.

3. Insert a formatted diskette in your diskette drive.

4. Make an adpu320 HBA diskette from the image file using this command:

# dd if=hba.adpu320.8.0.1a.image of=/dev/dsk/f0t obs=36b

5. Use this adpu320 diskette during system installation.

Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA CD from the HBA ISO image file.

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.adpu320.8.0.1a.iso file to the newly created /tmp/hba directory on your machine.

3. Make an adpu320 HBA CD from the iso file using this command:

# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.adpu320.8.0.1a.iso

where c,b,t is taken from the output of cdrecord --scanbus

4. Use this adpu320 HBA CD during system installation.

----------------------------------------------------------

II. Upgrading drivers on existing UnixWare 7 and OpenServer 6 systems

The adpu320 HBA diskette can also be used to install/upgrade the adpu320 driver on your system using the following command:

1. Insert the diskette containing the new driver and issue the following command:

# pkgadd -d diskette1 all
or
# pkgadd -d diskette1 adpu320

The adpu320 HBA CD can also be used to upgrade the megasas driver on your system using the following command:

1. Insert the HBA driver CD and type the command:

# pkgadd -d cdrom1 all
or
# pkgadd -d cdrom1 adpu320
----------------------------------------------------------
III. Software Notes

This driver has been tested with, and is supported on: SCO OpenServer Release 6.0.0 SCO UnixWare 7 Release 7.1.4

From the Xinuos technical article database, record 127020. Reproduced with permission. The original is at www.sco.com/ta/127020, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.