Problem
The IDE driver has trouble working with Intel ICH IDE controllers in Enhanced Mode.
FEATURES: Enhanced Mode support for all Intel ICH chipsets. Solution
The ide Driver Supplement Release 7.1.4b provides the following updated driver:
Generic ide - Updatedhba.ide.714b.image - Image of the ide driver Release 7.1.4b HBA Diskette. This can be used during fresh installation of any supported UnixWare 7 or OpenServer 6 system.
The following driver is included in hba.ide.714b.image:
ideThis image is available at the following URL:
https://ftp.scoexpert.com/openserver6/600/drivers-------------------------------------------------------------------------
I. InstallationWhile installing UnixWare 7 or OpenServer 6 be sure to insert the ide Driver Supplement diskette before any HBA drivers supplied with your media kit. Use the following steps on a UnixWare 7 system to create an HBA floppy from this image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.ide_714b.image file to the newly created /tmp/hba directory on your machine.
3. Make an ide HBA diskette from the image file using these command:
# dd if=hba.ide.714b.image of=/dev/dsk/f0t obs=36b4. Use this ide HBA diskette during system installation.
------------------------------------------------------------------------
II. Upgrading drivers on existing UnixWare 7 and OpenServer 6 systemsThe ide HBA diskette can also be used to upgrade the ide driver on your system using the following command:
1. Insert the HBA driver diskette and type the command:
# pkgadd -d diskette1 allor# pkgadd -d diskette1 ide------------------------------------------------------------------------
III. Software NotesThis driver has been tested with and is supported on:
SCO OpenServer Release 6.0.0 SCO UnixWare 7 Release 7.1.4 SCO UnixWare 7 Release 7.1.3