Technical article 126474

Host Bus Adapter (HBA) Driver Supplement - ide Driver release 7.1.4d

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

What is ide Driver Supplement Release 7.1.4d, the ide Driver HBA for SCO OpenServer 6.0.0 and UnixWare 7.1.4.

Solution

The ide Driver Supplement Release 7.1.4d provides the following updated driver:

Generic ide - Updated

hba.ide.714d.image - Image of the ide driver Release 7.1.4d HBA Diskette. This can be used during fresh installation of any supported UnixWare 7 or OpenServer 6 system.

This image is available at the following URLs:

https://ftp.scoexpert.com/openserver6/600/drivers
https://ftp.scoexpert.com/unixware7/714/drivers

Version 7.1.4d of the ide driver has the following changes:

Systems with IDE controllers without attached devices were showing the following warning when booting:

WARNING: ide_config: cm_intr_attach failed
Previously the pci driver did not create resmgr keys
for IDE controllers without devices.  Now the pci driver does
create resmgr keys, causing earlier versions of the IDE driver
to emit the warning.

Version 7.1.4c of the ide driver has the following changes:

- fixed problems with using ATAPI CDROM devices - updated to work with SATA devices in Enhanced mode This feature requires that you have Maintenance Pack 2 installed for OpenServer 6.0.0 and ptf9052 installed for UnixWare 7.1.4.

Version 7.1.4b of the ide driver has the following changes:

Added support for Intel ICH IDE controllers in Enhanced Mode.

Version 7.1.4a of the ide driver has the following changes:

Fix for a possible data corruption when using hard drives greater than 128GB in size.

-------------------------------------------------------------------------
I. Installation

While installing UnixWare 7 or OpenServer 6 be sure to insert the ide Driver Supplement diskette before any HBA drivers supplied with your media kit. Use the following steps on a UnixWare 7 system to create an HBA floppy from this image file.

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.ide.714d.image file to the newly created /tmp/hba directory on your machine.

3. Make an ide HBA diskette from the image file using these command:

# dd if=hba.ide.714d.image of=/dev/dsk/f0t obs=36b

4. Use this ide HBA diskette during system installation.

------------------------------------------------------------------------
II. Upgrading drivers on existing UnixWare 7 and OpenServer 6 systems

The ide HBA diskette can also be used to upgrade the ide driver on your system using the following command:

1. Insert the HBA driver diskette and type the command:

# pkgadd -d diskette1 all
or
# pkgadd -d diskette1 ide
------------------------------------------------------------------------
III. Software Notes

This driver has been tested with and is supported on:

SCO OpenServer Release 6.0.0 SCO UnixWare 7 Release 7.1.4

From the Xinuos technical article database, record 126474. Reproduced with permission. The original is at www.sco.com/ta/126474, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.