Technical article 126698

Host Bus Adapter (HBA) Driver Supplement - ide Driver release 7.1.4g

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

What is ide Driver Supplement Release 7.1.4g, the ide Driver HBA for SCO OpenServer 6.0.0 and UnixWare 7.1.4.

Solution

The ide Driver Supplement Release 7.1.4g provides the following updated driver:

Generic ide - Updated

hba.ide.714g.image - Image of the ide driver Release 7.1.4g HBA Diskette. This can be used during fresh installation of any supported UnixWare 7 or OpenServer 6 system.

This image is available at the following URLs:

https://ftp.scoexpert.com/openserver6/600/drivers
https://ftp.scoexpert.com/unixware7/714/drivers

Version 7.1.4g of the ide driver has the following changes:

Fixes a bug in version 7.1.4f which caused DMA to be disabled on i/o errors other than DMA errors.

Version 7.1.4f of the ide driver has the following changes:

Disable DMA only on a true DMA error, whereas previous versions of the driver disabled DMA on a larger class of i/o errors.

Allow the administrator some control over whether DMA is disabled
on an error, whereas previous versions always disabled DMA on an
error.  The default behavior is to disable DMA on an error;
however, the administrator can change this behavior by editing
/etc/conf/pack.d/ide/space.c to initialize the variable
ide_disable_dma_on_error to 0 and then rebuilding the kernel
and rebooting.

Return an error when reading a bad block, whereas previous versions sometimes returned bad data when encountering a bad block.

Version 7.1.4e of the ide driver has the following changes:

Includes a new utility, /sbin/idecfg, to display and modify the DMA mode of the devices attached on IDE controllers.

When invoked with no arguments, /sbin/idecfg displays the DMA mode of devices attached to IDE controllers.

When invoked as follows:
# /sbin/idecfg -c <ctrl-#> -t <target-#> -d <"enable"|"disable">

'idecfg' will enable or disable, as specified, DMA on the device with the specified controller and target numbers.

The driver also provides new ioctl interfaces utilized by idecfg to query and modify DMA mode of IDE devices.

Version 7.1.4d of the ide driver has the following changes:

Systems with IDE controllers without attached devices were showing the following warning when booting:

WARNING: ide_config: cm_intr_attach failed
Previously the pci driver did not create resmgr keys
for IDE controllers without devices.  Now the pci driver does
create resmgr keys and this warning no longer appears.

Version 7.1.4c of the ide driver has the following changes:

- fixed problems with using ATAPI CDROM devices - updated to work with SATA devices in Enhanced mode This feature requires that you have Maintenance Pack 2 installed for OpenServer 6.0.0 and ptf9052 installed for UnixWare 7.1.4.

Version 7.1.4b of the ide driver has the following changes:

Added support for Intel ICH IDE controllers in Enhanced Mode.

Version 7.1.4a of the ide driver has the following changes:

Fix for a possible data corruption when using hard drives greater than 128GB in size.

NOTE:      To disable DMA completely, visit /etc/conf/pack.d/ide/space.c
           and change:
int     ide_enable_dma = 1;     /* Enable/Disable DMA */
to:
int     ide_enable_dma = 0;     /* Enable/Disable DMA */
Then relink the kernel with:
# /etc/conf/bin/idbuild -F
Then reboot your server.
-------------------------------------------------------------------------
I. Installation

While installing UnixWare 7 or OpenServer 6 be sure to insert the ide Driver Supplement diskette before any HBA drivers supplied with your media kit. Use the following steps on a UnixWare 7 system to create an HBA floppy from this image file.

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.ide.714e.image file to the newly created /tmp/hba directory on your machine.

3. Make an ide HBA diskette from the image file using these command:

# dd if=hba.ide.714e.image of=/dev/dsk/f0t obs=36b

4. Use this ide HBA diskette during system installation.

------------------------------------------------------------------------
II. Upgrading drivers on existing UnixWare 7 and OpenServer 6 systems

The ide HBA diskette can also be used to upgrade the ide driver on your system using the following command:

1. Insert the HBA driver diskette and type the command:

# pkgadd -d diskette1 all
or
# pkgadd -d diskette1 ide
------------------------------------------------------------------------
III. Software Notes

This driver has been tested with and is supported on:

SCO OpenServer Release 6.0.0 SCO UnixWare 7 Release 7.1.4

From the Xinuos technical article database, record 126698. Reproduced with permission. The original is at www.sco.com/ta/126698, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.