Problem
What hardware is supported by the LSI MegaRAID SAS (megasas) Driver
1.0? Solution
The megasas Driver Supplement provides the following driver:
megasas - LSI SAS MegaRAID Version 1.0Version 1.0 of the megasas driver has the following changes:
provide support for HBA products and motherboards based on either the LSISAS1068 and LSISAS1078. Version 0.9 only supported LSISAS1068-based products.
provide support for Dell PERC 5/i SAS RAID controllers
Version 0.9 of the megasas driver has the following changes:
provide support for LSI MegaRAID SAS.This driver can be used during fresh installation of any supported OpenServer 6/UnixWare 7 system or can be applied to an existing system.
The megasas driver is provided in both hba.megasas.1.0.image, a dd image of an HBA floppy and hba.megasas.1.0.iso, an ISO image of an HBA CDROM.
Both images are available at the following URLs:
https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/driversHARDWARE: HBA hardware supported by megasas 1.0:
Adapter Type
---------------------------------- ------------
LSI MegaRAID SAS 8308ELP 8 ports, PCI Express 1.1
LSI MegaRAID SAS 8344ELP 8 ports, PCI Express 1.1
LSI MegaRAID SAS 8408E 8 ports, PCI Express 1.0
LSI MegaRAID SAS 8480E 8 ports, PCI Express 1.0
LSI MegaRAID SAS 8300XLP 8 ports, PCI-X
LSI MegaRAID SAS 8708ELP 8 ports, PCI Express 1.1
LSI MegaRAID SAS 8888ELP 8 ports, PCI Express 1.1Dell PERC 5/i SAS 8 ports, PCI Express 1.1-------------------------------------------------------------------------
I. InstallationWhile installing OpenServer 6/UnixWare 7 be sure to insert the megasas Driver Supplement media before any HBA drivers supplied with your media kit.
Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA floppy from the HBA floppy image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.megasas.1.0.image file to the newly created /tmp/hba directory on your machine.
3. Make an megasas HBA diskette from the image file using this command:
# dd if=hba.megasas.1.0.image of=/dev/dsk/f0t obs=36b4. Use this megasas HBA diskette during system installation.
Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA CD from the HBA ISO image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.megasas.1.0.iso file to the newly created /tmp/hba directory on your machine.
3. Make an megasas HBA CD from the iso file using this command:
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.megasas.1.0.isowhere c,b,t is taken from the output of cdrecord --scanbus
4. Use this megasas HBA CD during system installation.
------------------------------------------------------------------------
II. Upgrading drivers on existing OpenServer 6/UnixWare 7 systemThe megasas HBA diskette can also be used to upgrade the megasas driver on your system using the following command:
1. Insert the HBA driver diskette and type the command:
# pkgadd -d diskette1 allor# pkgadd -d diskette1 megasasThe megasas HBA CD can also be used to upgrade the megasas driver on your system using the following command:
1. Insert the HBA driver CD and type the command:
# pkgadd -d cdrom1 allor# pkgadd -d cdrom1 megasas------------------------------------------------------------------------
III. Software NotesThis driver has been tested with and is supported on:
SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0