Problem
LSI Fusion-MPT SAS Host Adapters are not supported on either UnixWare 7 and SCO OpenServer 6.
Solution
The mpt Driver Supplement provides the following driver:
mpt - LSI SAS Fusion-MPT Version 8.1.0Version 8.1.0 of the mpt driver has the following changes:
- provide support for LSI Fusion-MPT SAS chips and host adapters.
This driver can be used during fresh installation of any supported OpenServer 6/UnixWare 7 system or can be applied to an existing system.
The mpt driver is provided in both hba.mpt.8.1.0.image, a dd image of an HBA floppy and hba.mpt.8.1.0.iso, an ISO image of an HBA CDROM.
Both images will eventually be available at the following URLs:
https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/driversHARDWARE: HBA hardware supported by mpt 8.1.0:
Adapter or Chip Set Type
------------------- ------------
LSI Logic 53c1020 Ultra 320 SCSI
LSI Logic 53c1030 Ultra 320 SCSI
LSI Logic 53c1035 Ultra 320 in SCSI ModeLSI Logic FC909 Fibre Channel
LSI Logic FC919 Fibre Channel
LSI Logic FC929 Fibre Channel
LSI Logic FC919X Fibre Channel
LSI Logic FC929X Fibre Channel
LSI Logic FC929XL Fibre Channel
LSI Logic FC939X Fibre Channel
LSI Logic FC949X Fibre ChannelLSISAS1064 PCI-X 4-port SAS IC
LSISAS1068 PCI-X 8-port SAS ICNOTE: DELL Perc5i/R controllers using the LSISAS1068 chipset are also
supported by this driver.LSISAS1064E PCI Express 4-port SAS IC
LSISAS1068E PCI Express 8-port SAS ICLSISAS3041X-R PCI-X 4-port SAS HBA
LSISAS3442X PCI-X 8-port SAS HBA ( No RAID )
LSISAS3442X-R PCI-X 8-port SAS HBA
LSISAS3800X PCI-X 8-port SAS HBA ( No RAID )
LSISAS3080X-R PCI-X 8-port SAS HBALSISAS3041E-R PCI Express 4-port SAS HBA
LSISAS3442E-R PCI Express 8-port SAS HBA-------------------------------------------------------------------------
I. InstallationWhile installing OpenServer 6/UnixWare 7 be sure to insert the mpt Driver Supplement media before any HBA drivers supplied with your media kit.
Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA floppy from the HBA floppy image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.mpt.8.1.0.image file to the newly created /tmp/hba directory on your machine.
3. Make an mpt HBA diskette from the image file using this command:
# dd if=hba.mpt.8.1.0.image of=/dev/dsk/f0t obs=36b4. Use this mpt HBA diskette during system installation.
Use the following steps on a OpenServer 6/UnixWare 7 system to create an HBA CD from the HBA ISO image file.
1. Become root and create a new directory by typing:
$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba2. Download the hba.mpt.8.1.0.iso file to the newly created /tmp/hba directory on your machine.
3. Make an mpt HBA CD from the iso file using this command:
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.mpt.8.1.0.isowhere c,b,t is taken from the output of cdrecord --scanbus
4. Use this mpt HBA CD during system installation.
------------------------------------------------------------------------
II. Upgrading drivers on existing OpenServer 6/UnixWare 7 systemThe mpt HBA diskette can also be used to upgrade the mpt driver on your system using the following command:
1. Insert the HBA driver diskette and type the command:
# pkgadd -d diskette1 allor# pkgadd -d diskette1 mptThe mpt HBA CD can also be used to upgrade the mpt driver on your system using the following command:
1. Insert the HBA driver CD and type the command:
# pkgadd -d cdrom1 allor# pkgadd -d cdrom1 mpt------------------------------------------------------------------------
III. Software NotesThis driver has been tested with and is supported on:
SCO UnixWare 7 Release 7.1.4 SCO OpenServer Release 6.0.0