Problem
What is the vtblk Driver Supplement version 1.0a HBA for OpenServer 6 Definitive 2018 and UnixWare 7 Definitive 2018?
HARDWARE: This driver supports the VirtIO Block virtual device on OpenServer 6 Definitive 2018 or UnixWare 7 Definitive 2018.
Solution
The vtblk Driver Supplement provides the following driver:
vtblk - Virtio Block HBA DriverThis driver can be used during fresh installation of any supported OpenServer 6 and UnixWare 7 Definitive system, or can be applied to an existing system.
The following driver is included in hba.vtblk.1.0a.image:
vtblkVersion 1.0a was updated from version 1.0 to address an installation problem under KVM.
-------------------------------------------------------------------------
I. InstallationEither use patchck to install this device driver or follow this procedure:
1. Download the hba.vtblk.1.0a.image file to the /tmp directory on your machine.
2. As root, add the package to your system using these commands:
$ su -
Password: <type your root password>
# pkgadd -d /tmp/hba.vtblk.1.0a.imageAlternatively, this package may be installed in quiet mode. To do this, use these commands:
$ su -
Password: <type your root password>
# pkgadd -qd /tmp/hba.vtblk.1.0a.image all3. Reboot the system after install this package.------------------------------------------------------------------------
II. Software NotesThis device driver has been tested with and is supported on:
SCO UnixWare 7 Definitive 2018 SCO OpenServer 6 Definitive 2018