Problem
I would like to add the ide and/or ahci HBA that is supplied as part of MP2 to my system but the instructions in the Release Notes do not work. The instructions are:
# mount -F cdfs /dev/cd0 /cd-rom
# pkgadd -d /cd-rom/images/ide.image ideand# mount -F cdfs /dev/cd0 /cd-rom
# pkgadd -d /cd-rom/images/ahci.image ahci Cause
The ide and ahci HBAs are in the root directory on the MP2 ISO/CDROM and not in /images/....
Solution
To install the ide driver onto an existing OpenServer 6 system, put the MP2 CD into the primary CD drive on your server and as root run the following commands:
mount -F cdfs /dev/cd0 /cd-rom
pkgadd -d /mnt ideTo install the ahci driver onto an existing OpenServer 6 system, put the MP2 CD into the primary CD drive on your server and as root run the following commands:
mount -F cdfs /dev/cd0 /cd-rom
pkgadd -d /mnt ahciYou must then relink the kernel and reboot the system before the new HBAs can be used by the system. Do this using the following commands:
/etc/conf/bin/idbuild -B
init 6