Technical article 126686

How can I failback from the backup to the primary network card on my system?

OpenServer 6.0.0UnixWare 7.1.4

Written · Last revised

Problem

I have configured network failover on my system with a primary and a backup network card. I have failed the system over to the backup card but I cannot find any way not to fail back to the primary card using the Network Configuration Manager as the "revert to primary" option is grayed out.

Solution

This is a known issue with both OpenServer 6.0.0 and UnixWare 7.1.4 with MP2 or later and it has been reported to SCO Engineering.

To failback to the primary network card use:

nd failback <interface>

where <interface> would be net0 assuming that net0 is the primary network card on the system.

See also

nd(1M)
NOTES:    Automatic failback is not a currently supported feature of
          OpenServer 6.0.0 or UnixWare 7.1.4.

From the Xinuos technical article database, record 126686. Reproduced with permission. The original is at www.sco.com/ta/126686, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.